رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

فیجت فشاری نرم Zorbles همراه کیف

Zorbles - Ultimate Squishy Clicker Fidget with Carrying Case

طراح: bloblab

قیمت فایل با خرید و تحویل

۱٬۵۵۳٬۰۰۰ تومان

قیمت ارزی فایل
۴.۵۵ EUR
معادل تومانی
۱٬۳۳۸٬۰۰۰ تومان
کارمزد خرید
۲۱۵٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

# ZORBLES Introducing Zorbles, the ultimate fidget toy - a perfect orb that you can squish, squeeze, roll, and customize to no end. Each Zorble consists of two identical halves that snap together with a rubber band wrapped around the center to create their satisfying squish. Inspired by the collectability of classic marbles, you can make endless color combinations. Swap different halves for a dual color Zorble or change color halfway through a print to make a spotted Zorble. Make mini ones for quiet clicking or big ones for super squishing. Take your Zorble on the go with the carrying case that adds to the fidgeting fun. Pop one in and spin it around like the ball on those old school computer mice. The case even doubles as a display so you can show off your entire Zorble collection on your desk. ## PERSONAL USE ONLY Purchasing or downloading this file does not give you the right to sell physical prints of this design. Commercial license is available for this design by subscribing to [patreon.com/bloblab](https://www.patreon.com/bloblab "patreon.com/bloblab") ## COPYRIGHT PROTECTED FILES All Blob Lab designs are protected under copyright law. Your purchase does not give you the right to sell or distribute the digital files in any way. ## FILAMENTS If you'd like to purchase the same filaments used in this design, please check out the Blob Lab Amazon Storefront affiliate link [amazon.com/shop/bloblab3d](https://www.amazon.com/shop/bloblab3d "amazon.com/shop/bloblab3d") [Check out this tutorial video!](https://www.instagram.com/p/DWBz4nRDcD7/) - .12mm layer height recommended for high quality - print Zorbles without supports, add brim if needed - concentric top surface pattern recommended for smoother Zorbles - brim and supports are highly recommended for printing the Zorble Case - add a [3.5mm ball chain](https://amzn.to/4scR4bz) with the length of 125mm to the case - if you scale Zorbles you may need to adjust x-y compensation ## Assembling the Zorble Parts - Each Zorble has two identical halves. After printing make sure the joints are moving freely. - Lay one half flat and press the center onto the end connector of the other one. They should press fit together and be snug. - Do the same with the remaining 3 connectors. - Once all four ends are connected you can press down in the center to make sure all the connections are flush and smooth. Use a dowel or screwdriver for easier pressing. - If joints are too loose, you can add positive x-y contour compensation (approx. 0.03mm). - Alternatively you can add a drop of superglue if the connections are too loose. - If joints are too tight, add negative x-y contour compensation (approx. -0.03mm). ## Adding the Rubber Band - Add a rubber band, elastic band, or o-ring around the center of the Zorble. It should work with any band that is between 10-20mm in outer diameter with about 1-2mm thickness. - Squeeze it and make sure the band slides into all four sides. - [15mm silicone o-ring](https://amzn.to/4rC5mBt) (out of stock currently) is ideal for the longest lasting Zorble - [clear elastic hair ties](https://amzn.to/4s2fvYh) also work great and are less expensive - 15mm rubber bands also work but may wear down quicker - Experiment with smaller/larger or thick/thin rubber bands to change the feel and snap - Larger common household rubber bands can also be used if wrapped around 2 or 3 times. - If you scale the Zorble, the band should be half the diameter of the Zorble. Need help? Check out the [FAQ](https://www.blob.town/faq) or join the [Discord](https://discord.com/invite/xyyR4DSQRn). Some of the above links are affiliate links. We appreciate the support if you choose to use them.

  • flexi
  • clicker
  • fidget
  • sphere
  • orb
  • squishy
  • fun
  • toy
  • ball
  • cool
  • spinner
  • print as parts
فیجت فشاری نرم Zorbles همراه کیف (Zorbles - Ultimate Squishy Clicker Fidget with Carrying Case) — فایل پرینتر سه‌بعدی (STL)