رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

مدل سه‌بعدی اژدهای مفصلی Wyvern

Wyvern - Flexi Articulated Dragon (print in place, no supports)

طراح: IXPatch

قیمت فایل با خرید و تحویل

۱٬۱۲۱٬۰۰۰ تومان

قیمت ارزی فایل
۳.۱۳ EUR
معادل تومانی
۹۲۱٬۰۰۰ تومان
کارمزد خرید
۲۰۰٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

This is a flexible, articulated wyvern 🐲 It can stand on its own and move each leg and wing separately, as well as open its mouth. As you can see in my pictures, it can also hold a pose. When properly balanced, it can even extend its wings above its body. It prints in place, no supports or assembly required, and is PLA compatible. In addition to the single-color version, I have also included the multicolor version (for BambuStudio) that you can see in my pictures. Enjoy :) --- After printing, it may be necessary to gently pry open the mouth. To do this, carefully insert pliers into the front part of the mouth between the "beak" and the jaw, then twist them to separate the two pieces. No supports required, but due to the small contact area of some parts with the build plate, a brim or a raft is highly recommended. Printed fine for me with generic PLA at 0.2 and 0.3 layer heights. As with any print-in-place design: make sure you have good first layer adhesion (when in doubt: use a brim or a raft) and your printer is set up correctly for bridging as well as small clearances.

  • flexi
  • flexible
  • articulated
  • moving
  • jointed
  • print-in-place
  • fantasy
  • dragon
  • poseable
  • wyvern
  • wyrm
  • animal
  • cool
  • creature
  • toy
مدل سه‌بعدی اژدهای مفصلی Wyvern (Wyvern - Flexi Articulated Dragon (print in place, no supports)) — فایل پرینتر سه‌بعدی (STL)