رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

پایه هدست VR

VR head stand

طراح: Fensome3D

قیمت فایل با خرید و تحویل

۱٬۶۴۲٬۰۰۰ تومان

قیمت ارزی فایل
۴.۸۱ EUR
معادل تومانی
۱٬۴۱۵٬۰۰۰ تومان
کارمزد خرید
۲۲۷٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

A modern 'head' stand to store your virtual reality headset or headphones (and anything else you can think of. A nice beanie perhaps?). The model is designed for the Meta (Oculus) Quest 2, Meta Quest 3 & 3S. Please check the dimensions of the Meta Quest 2 or 3 for reference should you wish to download this model to use for another VR headset. This stand will function with the stock Meta Quest 2 & Meta Quest 3 & 3S head strap. The controller openings atop the model are designed for the Meta Quest controllers. Pictures of the hole size have been included for reference. The hole depth is approximately 65mm. The holes have a slight taper meaning the size at the bottom does not match the top (Around 5mm less overall). This information is only required for those wanting to download this stand for another headset. Overall stand size: 194mm x 165mm x 210mm Recommend wall thickness 1.2mm (or 3 walls at 0.4mm line width) 5% infill (Higher values is just a waste of filament. I have tested at 3% infill and it's fine) One trick is to set layer height to 0.2mm and infill layer thickness to 0.4mm. This cuts time significantly as it will perform infill moves every other layer. No supports needed.

  • oculus
  • vr
  • stand
  • accessories
  • headphone
  • quest 2
  • quest 3
  • quest 3s
  • meta quest
پایه هدست VR (VR head stand) — فایل پرینتر سه‌بعدی (STL)