**UPDATED** HELLDIVERS 2 B-01 Tactical HELMET COSPLAY 1:1 Replica Ready To Print
طراح: ThePropSpector
قیمت فایل با خرید و تحویل
۳٬۱۰۱٬۰۰۰ تومان
- قیمت ارزی فایل
- ۹.۰۹ EUR
- معادل تومانی
- ۲٬۶۷۳٬۰۰۰ تومان
- کارمزد خرید
- ۴۲۸٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
**UPDATE June 20th, 2026** - Fully reworked helmet. - Better assembly. - 6x4 Magnet version - Non magnet version - P1P/A1 Profile ready to print added. - Higher quality, better topology. - Higher in-game fidelity. **This time, this is the ultimate update for this helmet, as it has everything down to the last detail.** **Small Updates** - Updated vents for a better fit. - Updated P1P Profile. --- Hello fellow Helldiver, Unikv The Propspector here, looking to expand our managed democracy? Well, you'll need a helmet. Here you go. Hope the equipment from the Ministry of Defense serves you well. --- This is the B-01 Tactical, the files contain: - Magnetized version (6x4mm) - Non Magnetized version - A1/P1P profiles with every setting prepared to print as soon as you download it. - A visor prepared to be printed in resin - A visor buck to vacuum form a visor out of its shape. The files are pre-sized to comfortably fit a **22.4" or 58cm** head by default, but you can resize it. Print With The PropSpector, **Print Gold**. Follow for more. **For commercial rights to sell a physical copy using these files, you can get them by joining the Prophet tier on my Patreon by clicking the icon below, do not redistribute these files.** [](https://www.patreon.com/c/thepropspector/membership) --- **Friendly reminder you can pair this helmet with any armor!** [creation helldivers-2-ds-10-big-game-hunter-armor-1-1-replica-print-ready-to-print] 3 Walls 11% Gyroid PLA/PETG The Front.stl has a shape to be slotted on the Top.stl, the back can be either strapped or magnetized with 6x4mm magnets. There's a non-magnet version in case you just want to use elastic or just glue everything and call it a day, but you need to size it up a bit more so it can fit over your head without issues. The magnet version allows for a more snug fit thanks to the removable back. **24h 22m print time, 635g material used, tested in both profiles.** If you got any questions at all, send me a message I **ALWAYS** respond.
- helldivers
- helmet
- 01
- b-01
- tactical
- 3d
- model
- wearable
- cosplay
- armor
- super earth
- democracy
- liber-tea
- scan
- replica
- 1:1
- stl