پایه نگهدارنده گوشی خودرو یونیورسال
universal car phone holder
طراح: hotMess3D
قیمت فایل با خرید و تحویل
۷۳۰٬۰۰۰ تومان
- قیمت ارزی فایل
- ۱.۸ EUR
- معادل تومانی
- ۵۳۰٬۰۰۰ تومان
- کارمزد خرید
- ۲۰۰٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
There were requests, so I made a larger version which is available here: https://cults3d.com/en/3d-model/gadget/universal-car-phone-holder-xl I couldn't find a truly universal phone holder so i designed one. Features: - it takes any phone thickness from 6 to 9 mm without adjustments - its takes any phone width from 65 to 78 mm without adjustments - allows for 1 hand operation - provides a very firm grip on the phone - threads designed in to the parts Assembly: Watch the assembly gif. You need 8 of M4 x 16mm bolts and 3d printed parts. Use exacto knife to clean mouse ears from models center_v5_a and center_v5_b. Use size 2,5 allen key to tighten the bolts. After tightening the bolts unscrew them 1/2 turn to allow for smooth operation. Recommended print settings: Material: I recommend petg, asa, abs, pc... Pla will be fine if your car wont stay on hot sun for long periods. Pla softens and deforms fast, specially when under load. Nozzle diameter: 0,4mm Layer width: 2 or 3 layers. Layer height: 0,2mm Infill: 10% Support material: not needed (designed for fdm)
- universal
- car
- phone
- holder
- easy
- use
- one hand
- secure
- firm
- sturdy
- sla
- fdm
- pla
- petg
- abs
- mobile
- vent
- mount