رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

شاخ‌های Tyranny از کمپین چهارم Critical Role

Tyranny's Horns - Critical Role Campaign 4

طراح: paindepeche

قیمت فایل با خرید و تحویل

۲٬۲۵۶٬۰۰۰ تومان

قیمت ارزی فایل
۶.۶۱ EUR
معادل تومانی
۱٬۹۴۴٬۰۰۰ تومان
کارمزد خرید
۳۱۲٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

Tyranny's Horns and Earring from Critical Role Campaign 4 (.stl) These horns stand at approximately 20cm, and have an option for a headband attachment, elastic attachment, or a basic version for you to add your own attachment. Please note the headband is designed to fit under the front of a wig, and will attach the horns with friction. I would recommend sanding down the 'key' of the headband to fit snugly into the horns for a secure fit, or scaling the headband down to around 90% to easily slot the horns on. The headband can also be head formed to your head shape if printed in a heat-malleable plastic such as PLA This model can be scaled to fit the needs of your cosplay, but please be aware the headband will also need to be scaled. The earring can be printed in 1 or three pieces, with the middle section scaled lengthways to fit your ears! If you have any issues or need help with any of the models please feel free to ask me in private message, I will be happy to assist you :) Intended for personal use only - please do not resell. Commercial use must buy a new copy for each item produced. Please tag me in your creations, I love to see them! Happy printing ~ These models can be printed in PLA, resin, ABS, etc though I would recommend PLA for the headband and horns I suggest printing the horns at a low infill for light weight, and the headband at a higher infill for strength. I typically use the following settings for printing: Layer height 0.2 mm Infill 20% Supports 45° Please check scale and supports before printing.

  • tyranny
  • tyranny horns
  • tyranny critical role
  • devil
  • demon
  • demon horns
  • devil horns
  • horns
  • critical role
  • critical role campaign 4
  • dnd
  • dnd horns
  • dnd devil
  • dnd demon
  • cosplay
  • cosplay prop
شاخ‌های Tyranny از کمپین چهارم Critical Role (Tyranny's Horns - Critical Role Campaign 4) — فایل پرینتر سه‌بعدی (STL)