رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

راننده ماشین کنترلی 1/10 با سر چرخان و بازوهای متحرک

1/10 Turning Head RC Driver With Movable Arms

طراح: robroy07

قیمت فایل با خرید و تحویل

۳٬۴۱۱٬۰۰۰ تومان

قیمت ارزی فایل
۱۰ EUR
معادل تومانی
۲٬۹۴۰٬۰۰۰ تومان
کارمزد خرید
۴۷۱٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

This is the Mk2 of the [Turning Head RC Driver](1-10-turning-head-rc-driver). It turns the head using a micro servo that is inside the body and the arms have joints that allow to add a steering wheel with a servo that move them. Here is a video of how it works: https://www.youtube.com/watch?v=3rBb0xzwRgE There are 2 options: - Full body: The legs can also move and that way it can adapt to different seat heights. - Half body: It has only the top part of the body (useful for lexan interiors. To build this you will need: - 1 x Micro servo 9g (23x12x29mm) – It is used to make the head turn I bought mine here: https://aliexpress.com/item/1005004195697567.html - 1 x 5mm M1.4 screw – It is used to hold the micro servo horn You can find them here: https://aliexpress.com/item/10000181293335.html - 2 x 8mm M2.5 screws – They are used to join the legs or cover if you don’t want legs) to the top part of the body and keep the servo in place. To connect it to your RC you may need: - 1 x Servoinversor – It can be useful to make the head turn the opposite direction (it will depend on your main steering servo position) I bought mine here: https://aliexpress.com/item/32728471122.html - 1x Servo cable splitter – If you want to use the same channel of your main steering servo, you will need it. You can find it here: https://aliexpress.com/item/1005002233232226.html I have included a brief manual with instructions to build the driver. It is available in both English and Spanish. IMPORTANT: The arms and legs should be printed in the way the models are placed when you open them in the slicer. You should use supports to print them properly. I have added an image to try to explain better what I mean. I hope you like it! Note: It includes the driver and the steering wheel with the servo support. The seat is not included, it is only for testing purposes. Update 2023-12-08: I have included another head, this time with nice hair and beard Update 2024-04-06: I have included the bottom part of the body (legs) that can be used to put the driver standing. I have done it since I got the suggestion and thought that could be useful but I couldn't test it yet. It cannot be fixed with screws but you can use double sided tape, glue or a couple of pins. Update 2024-08-20: Now there is also the white steering wheel and the support for the servo (9g: https://aliexpress.com/item/4000903734519.html). You will need to use 2 x M2 5mm screws. Update 2024-11-22: I have included another head that has a cap. [creation 1-10-crash-test-dummy-figure-ragdoll-robroy07] [creation 1-10-realistic-rc-driver] Print using PLA at 0.15-0.10 mm layer height

  • head
  • turning
  • moving
  • servo
  • figurine
  • driver
  • person
  • rc
  • 1/10
  • lexan
  • man
  • model
راننده ماشین کنترلی 1/10 با سر چرخان و بازوهای متحرک (1/10 Turning Head RC Driver With Movable Arms) — فایل پرینتر سه‌بعدی (STL)