مدل برشخورده موتور توربوپراپ هواپیمای تجاری
Turboprop Engine, for Business Aircraft, Free Turbine Type, Cutaway
طراح: konchan77
قیمت فایل با خرید و تحویل
۳٬۵۰۷٬۰۰۰ تومان
- قیمت ارزی فایل
- ۱۰.۲۸ EUR
- معادل تومانی
- ۳٬۰۲۳٬۰۰۰ تومان
- کارمزد خرید
- ۴۸۴٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
This is a model of the Turboprop Engine for Business Aircraft, etc. Engine of this class has many features other than the large size jet (fan) engine. - Smaller size - Higher RPM - Lighter weight These features make the complex air flow and unique configuration. There are two types of this class engine; - Direct drive This type model was uploaded to the following URL. https://cults3d.com/en/3d-model/tool/turboprop-engine-for-business-aircraft-cutaway - Free turbine This cutaway model is the free turbine type. - Features of this model has 2 major assemblies ①. Free Turbine Assy (Forward of Engine) (1) Power Turbine Rotor (2) Dual Planetary Reduction Gearing (3) Exhaust Ducts ②. Gas Generator Assy (Backward of Engine) (1) Circumferential Type Air Intake (2) Combination Type Compressor (Axial + Centrifugal) Note: Stators of Axial Compressor are intentionally omitted to avoid rubbing during rotation. (3) Reverse Flow Combustion Chamber (4) Axial stage Turbine (5) Accessory Gear Box (including Oil Tank) - Assembly Manual (PDF format, total 19 pages) The detail assembly manual including "Parts-List", "After printing treatment" and "Assembly procedure" are prepared based on "Standard Skill (Filing, Drilling, Tapping and painting)". Download files includes; -files: STL Files (60 items) STL file name: "ws" of last 2 digits means "With Support" which special designed. -images: Parts Breakdown for assembly Aid, Subassembly Photos -PDF (Zip) File: Assembly Manual Purchase Parts Information; (No Metal Ball Bearing is used) -Aluminum Tubes See Parts List -Screws Micro screws M1.4x3.5L - Appox. 50 ea - Direct screw-in to 1 mm dia hole (No nut) Screws M2 x ** - See Parts List Total Net Print Time: Approx. 50HR - (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support) Note: When at actual print, each parameter may be adjusted by your experience. This is the most challengeable item in the creations which I made before. I do hope your success!! [Update] - 2018.3.14 Photo of typical special support is added. [Update] - 2018.7.12 Revised Description only. [Update] - 2018.7.19 Modified Comp-Rotor901ws.stl is introduced. [Update] - 2018.7.20 Modified Comp-Rotor901ws.stl was changed to Comp-Rotor801ws.stl and 3-piece type [Update] - 2021.4.12 Improved files and related figure uploaded Comp-Rotor-1st-01ws.stl → Comp-Rotor-1st-101ws.stl Comp-Rotor801ws.stl → Comp-Rotor801aws.stl [Update] - 2021.4.14 Improved file Comp-Rotor-1st-101ws.stl - Re-changed [Updated] - 2022.2.24 "Note" added in ②(2) [Update] - 2022.6.20 "Assembly-Manual-R01" reflected above Mod-Parts is uploaded 3D printing settings Raft, Support, Layer Height, Infill: Depending on your experience. But the parts having gear, small shaft and thin portion: 100% infill is recommended. My models were printed by "idbox" using with 0.4 nozzle, 1.75 PLA.
- engine
- jet engine
- turboprop
- business aircraft
- free turbine
- cutaway