رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

مدل قطار-مار سازگار با IKEA/BRIO

Train-Snake compatible with IKEA/BRIO easy to assemble

طراح: LabLabStudio

قیمت فایل با خرید و تحویل

۸۱۸٬۰۰۰ تومان

قیمت ارزی فایل
۲.۱ EUR
معادل تومانی
۶۱۸٬۰۰۰ تومان
کارمزد خرید
۲۰۰٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

It's a snake... but it's a train... but it's a snake. And it rolls on IKEA, BRIO, etc. wooden rails. But if you don't have one, no need to go buy some, rails are provided with the snake. To make it roll, nothing could be simpler, print, click the wheels, the wagons, and let's go!! **IMPORTANT**: The files you buy are sold under Copyright. This means that they cannot be sold or distributed for free. Additionally, you may not sell prints made from these files. If you did, you would jeopardize the creation of new designs. Thank you for your understanding. **YOU CAN HOWEVER SELL YOUR PRINTS OF MY DESIGNS** by subscribing to the "3D print seller" subscription: https://www.patreon.com/LabLabStudio **ALL MY DESIGNS ARE INCLUDED IN THIS SUBSCRIPTION** To compose a train, it's easy. There are 3 wheeled elements. The head, the tail, the wagon. You need 4 wheels for each one. You can insert as many wagons as you want. Between each element with wheels, it is mandatory to insert an intermediate ring, without wheels. It will therefore be necessary at least, the head, the tail, an intermediate ring and 8 wheels. You can customize the head. All possible heads are pictured. This design also includes a tongue to insert in the mouth, a straight rail and a curved rail. Feel free to post your creations, I would love to see them. To compose circuits of all kinds, you have everything here: https://cults3d.com/en/design-collections/LabLabStudio/trains-et-rails-compatibles-ikea-brio This train was modeled from this snake: [creation serpent-articule-en-place-rigidifiable-animable-reparable] My other models: https://cults3d.com/en/users/LabLabStudio/cr%C3%A9ations Have fun ! Rolling elements and wheels can be printed in 0.2mm or 0.28mm with 15% cubic infill. The middle ring prints fine without infill. Ball joints are pre-supported, do not add support. The rails are solid and do not require any special attention. No support no assembly. Printing can be done in 0.28mm, with 10% infill, in cubic. **I DO NOT THINK THIS MODEL IS SUITABLE FOR RESIN PRINTERS.**

  • train
  • snake
  • ikea
  • brio
  • wagon
  • locomotive
  • rail
مدل قطار-مار سازگار با IKEA/BRIO (Train-Snake compatible with IKEA/BRIO easy to assemble) — فایل پرینتر سه‌بعدی (STL)