جلوپنجره لانهزنبوری Toyota با لوگو
Toyota Snorkel Grille – Honeycomb Insert with Logo | 4×4 & Off-Road
طراح: SpliCer31
قیمت فایل با خرید و تحویل
۴۹۴٬۰۰۰ تومان
- قیمت ارزی فایل
- ۱ EUR
- معادل تومانی
- ۲۹۴٬۰۰۰ تومان
- کارمزد خرید
- ۲۰۰٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: CC BY - Attribution — فروش محصول چاپشده مجاز است
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
**Give your snorkel a distinctive Toyota look!** This custom snorkel grille combines an open honeycomb pattern with the Toyota oval emblem and bold TOYOTA lettering. A finishing touch for anyone who enjoys adding a personal detail to their 4×4. The emblem is integrated directly into the surrounding honeycomb. The lettering connects to the frame through the letters themselves, keeping the spaces around them open. **Design features** - Toyota oval emblem integrated into the honeycomb mesh. - Bold, easy-to-read TOYOTA lettering. - Open spaces around the emblem and lettering. - Rounded outer frame with integrated mounting features. - One-piece design for FDM 3D printing. **Overall dimensions:** 152 × 105.16 × 18.40 mm **Scale:** 1:1 — import into your slicer at 100%, using millimetres. **Compatibility** Designed for snorkel heads with a matching opening and mounting arrangement. Please compare the dimensions and mounting points with your existing snorkel head before purchasing or printing. For permanent outdoor use, ASA is my recommended material. See the printing instructions for alternative materials and suggested settings. I’d love to see photos of your printed grille fitted to your vehicle! **Recommended materials** **ASA — recommended for permanent outdoor use** A good choice for a part exposed to sunlight, weather and heat. ASA offers high UV and temperature resistance. An enclosed printer is recommended for this model to reduce warping. Keep the room adequately ventilated while avoiding drafts around the print. **PETG — a practical alternative** Tough, relatively easy to print and suitable for many outdoor applications. ASA offers greater temperature resistance for prolonged sun exposure and high surface temperatures. Check the heat resistance specified for your particular PETG. **PLA / PLA+ — for fit checks and display models** Useful for checking dimensions and fit before printing the final part. Standard PLA is not recommended for permanent use on the vehicle because of its limited heat resistance. The “PLA+” label alone does not guarantee improved temperature resistance. **Suggested FDM print settings** - **Nozzle:** 0.4 mm. - **Layer height:** 0.20 mm. - **Walls/perimeters:** 4–5. - **Top and bottom layers:** At least 5 each at a 0.20 mm layer height. - **Infill:** 30–40%, such as gyroid. - **Orientation:** Place the visible front face, including the logo and lettering, flat against the build plate. - **Supports:** Requirements depend on your printer and bridging settings. Check the sliced preview, especially the rear logo connections, which print as bridges in this orientation. - **Bed adhesion:** An outer brim can help reduce warping, particularly when printing ASA. - **Temperatures and cooling:** Follow the recommendations for your specific filament. These are suggested starting settings. Adjust them to suit your printer and material. After printing, remove any brim, clean up the mounting holes and check the fit. Inspect the honeycomb, logo connections and mounting features for good layer bonding before installation.
- toyota
- toyota logo
- snorkel
- snorkel grille
- snorkel grill
- snorkel insert
- honeycomb
- grille
- 4x4
- offroad
- overlanding
- car accessories
- custom grille
- stl
- 3d printing
- asa
- petg