رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

جعبه ابزار Creality K1/K1C

ToolBox for Creality K1 /K1C

طراح: AXIOMPrints

قیمت فایل با خرید و تحویل

۵۰۳٬۰۰۰ تومان

قیمت ارزی فایل
۱.۰۳ EUR
معادل تومانی
۳۰۳٬۰۰۰ تومان
کارمزد خرید
۲۰۰٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

05/19/24 - Added V2 tool box model for K1C (Added storage space for a new type of nozzle (K1C) and added strength for the filament clip 03/28/24 - Added larger models of the toolbox for K1 and K1C, moved some parts and added a scraper in case the bundled one is broken! I was inspired to create this model because the tools in the kit were always scattered and there was no place for them, so I created a model of a printer toolbox for the entire set and not only. After you purchase this toolbox, you will have access to other models for stacking new bits or knives, a box for for blades, a drawer for the control display, and clamps for connecting the right and left toolboxes. You can choose from 5 types of left and 4 types of right drawers and their subtypes, e.g. with and without logo, with and without holder Left toolboxes: 1) Creality K1 V1 toolbox - 1 model without fixators (can be freely removed from under the printer). 2) Fixator V2 toolbox - model with locking tabs (can be freely removed from under the printer). install, lift the printer and slide the box under it, once installed, the box cannot be pulled out all the way). 3) Creality K1 V3 Tool Box - model with an updated front panel design and locking tabs. 4) Tool Box V4 - updated design and hex key holder 5) ToolBox K1/K1 MAX - a model suitable for K1 and K1 MAX Right tool box: 1)Box for caliper V3 - model that holds caliper bit boxes 2)Right box V3 - model for your tools and bit boxes 3)Empty - empty box and without new front panel 4)Box for caliper V4 - Updated design and added section The rest: 1)For nozzle assembly - an organizer for your nozzles 2)To assemble the knives - an organizer for your knives 3)Nozzle and knife - 2 models in one file 4)Overlay on the past version - front part of the toolbox for version 3 (which you can glue on version 1 of the toolbox) 5)Fixator - fixator for the 1st version of the toolbox if you want it not to pull out from under the printer completely. 6)Screwdriver bit box - a box for the bits in the right hand box 7)Clips - clips for connecting the right drawer and with the left drawer 8)Hex wrench holder no logo - separate file with hex wrench holder no logo 9)Hex wrench holder - separate file with hex wrench holder with logo 10)Fixator V4 - fixators for connecting the right and left drawers version 4 Slicer: Creality print Plastic: Hyper PLA Layer height: 0.20 Line wight: 0.42 Wall lines: 2 Filling: 15% Temp nozzle: 220° Temp bed: 50° Print Speed: 200.00 Infill Speed: 200.00 Outer Wall Speed: 140.00 Inner Wall Speed: 160.00 Top Surface Skin Speed: 140.00 Top/Bottom Speed: 140.00 Cooling:off You can print on the default settings the model is very easy to print

  • k1
  • box
  • toolbox
  • creality