جعبه هدیه اعصابخردکن
The Annoying Gift Box
طراح: ThinAir3D
قیمت فایل با خرید و تحویل
۱٬۰۰۰٬۰۰۰ تومان
- قیمت ارزی فایل
- ۲.۷۲ EUR
- معادل تومانی
- ۸۰۰٬۰۰۰ تومان
- کارمزد خرید
- ۲۰۰٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
The Annoying Gift Box. There's nothing tricky about this gift box, it's just simply...annoying. Remove 20 bolts to be able to remove the lid, that's about it! There is a secret flat head "screwdriver" hidden underneath the ribbon, or a normal flat-head screwdriver can be used. **11/28/2023: I have added 4 more types of bolts and their corresponding tools, so you can now make the box even more annoying! It is scaled just about gift card size, so you can scale up as you want to fit bigger items. **These designs are uploaded with a non-commercial license. Purchasing this file does not grant you the right to sell commercially. If you would like to consider gaining access to ALL of my models and the rights to print and sell them, you can check out my Patreon at https://www.patreon.com/thinair3D #XMASCULTS **These are just the settings I used to test the model, feel free to use whatever settings work best for you. FDM or Resin: FDM Scaling: Can be scaled up, bolts likely won't work well if scaled down. Supports: None Infill/Perimeters: I just used 15% infill with 2 perimeters, but I would use extra perimeters for more strength. Nozzle Size: 0.4 Layer Height: 0.2 No supports are needed for this model, just print the pieces in the orientation that they import and assemble after printing. You will need 1 container, 1 lid, 1 ribbon, 1 screwdriver, 4 brackets, and 20 bolts. **As of 11/28/2023 there are now 5 different bolt variations and their corresponding tools so now you can make it even more annoying. The flathead is the only one designs to fit under the ribbon at this time. The "screwdriver" just snaps into place underneath the ribbon after printing. I have included a "thread test" file so you can make sure that the bolts are going to fit into your box before you print all of them! Make sure to print the thread test in the orientation that the file imports in. The female part will be printing vertically, so it needs to be tested in that orientation. File List (7): - annoying_box_container (STL) - annoying_box_lid (STL) - annoying_box_ribbon (STL) - annoying_box_screwdriver (STL) - annoying_box_bracket (need 4) (STL) - annoying_box_bolt (need 20) (STL) - annoying_box_thread_test (STL) - annoying bolt variations (ZIP) - 4 new bolts and their tools Changelog: 4/23/2023: Uploaded Ribbon v2 (has thicker center support to help prevent fails) 11/28/2023: Uploaded new bolt variations: phillips, 5.5 hex, 6 hex, and security bit.
- gift box
- gift
- box
- christmas gift
- christmas
- christmas decor
- toy
- annoy