جام جایزهای پخشکننده آبنبات SWEET VICTORY
🏆 SWEET VICTORY — Candy Dispenser Trophy
طراح: relief_art
قیمت فایل با خرید و تحویل
۲٬۶۹۵٬۰۰۰ تومان
- قیمت ارزی فایل
- ۷.۹ EUR
- معادل تومانی
- ۲٬۳۲۳٬۰۰۰ تومان
- کارمزد خرید
- ۳۷۲٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
A 3D printed candy dispenser shaped like the most recognizable trophy in football. 🎬 See it in action: **[CLICK!](https://www.youtube.com/shorts/Jffd2Hom20U)** Rotate the globe on top and candies drop into the malachite trays on the sides. Release the globe and it smoothly returns to its starting position. Inside there's a dosing disc that releases one portion at a time, remove it for free pour mode. Trays snap on with magnets and slide out whenever you need a handful. No electronics, no batteries. Just plastic parts, a few magnets and a rubber band. 📝 List of required parts: **[CLICK!](https://drive.google.com/file/d/1H2zQYNe02w6jg-mIdn4WD3mfdaVZJTj5/view?usp=sharing)** Dimensions: ~330 × 115mm Print time: ~34h Weight: ~640g 🍬 Works great with M&M's, Skittles, Reese's Pieces and similar smooth candies up to ~20mm. Filaments used: - Body & globe: any silk gold PLA works. The version in the video is finished with Montana Gold Metallic Goldchrome spray for a deeper metallic look. - eSUN PLA+ Pine Green, Jade Green, Black: malachite trays - Creality Hyper PLA Green: playing field inserts Includes: - Pre-configured .3mf project (Orca Slicer / Bambu Studio) - STL files - User guide (PDF) with full assembly video 📄 A preview of the user guide is attached above. It covers everything in detail: filaments, hardware, candy guide, print settings and the full assembly video with commentary. Minimum build plate required: **220 × 220 mm** Everything is pre-configured in the included .3mf project — supports, fuzzy skin, walls and layer heights are set per part, so just load, slice and print. Use PLA for the body and globe, PETG for the precision parts (dose_disk, body_bracket). Two things worth knowing: reinforce the thin "hands" zone on the body with extra walls via a Height Range Modifier, and if the flaps warp — glue stick, lower speed, print them one at a time. Full settings, hardware list and assembly video are in the included PDF user guide.
- soccer trophy
- candy dispenser
- football trophy
- champions trophy
- golden trophy
- candy machine
- mechanical
- functional print
- desk toy
- gift
- football fan
- soccer
- home decor
- collectible
- fuzzy skin
- multi part
- trophy