رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

اکشن‌فیگور Storm Shadow با حلقه O

Storm Shadow // GI Joe // O-Ring Action Figure

طراح: applesandrice

قیمت فایل با خرید و تحویل

۱٬۲۶۲٬۰۰۰ تومان

قیمت ارزی فایل
۳.۶۱ EUR
معادل تومانی
۱٬۰۶۲٬۰۰۰ تومان
کارمزد خرید
۲۰۰٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

It's Storm Shadow!! Fully articulated to match his original '84 release, and he comes complete with recreated accessories!!! Using an existing scan that is freely available here: https://www.thingiverse.com/thing:5388686 ... I spent numerous hours cleaning up elements of the scan, as well as recreating all joints and internal structures in order to produce a printable, buildable, perfectly functioning Storm Shadow v1 action figure. After completing work on the figure, however, it was immediately obvious that he was going to need some plastic things to wave around -- so I painstakingly recreated all of the original weapons (with a few minor tweaks to make them more 3D-print friendly)!! All included here!! HOORAY!!!! This download includes multiple possible figure configurations, including: - 1982 Straight-Arms with Swivel-Neck Torso and Head; - 1983 Swivel-Arms with Swivel-Neck Torso and Head; - 2024 Vintage Compatible Swivel-Arms, with Ball-Neck Torso and Head. - 2024 NEW SWIVEL HANDS VERSION!! :o The 1983 swivel-head option is included in the original (larger) ZIP file, which also includes the figure's accessories. The 2024 ball-neck components are included in a separate, smaller ZIP file bearing the "BN" (Ball-Neck) designation. Please note: legs, hips, and accessories are compatible with each of the above head/torso/arm configurations. The 1983 arms are NOT compatible with the ball-neck torso. In each of the two figure configurations, I've also included two versions of Stormy's chest -- one which includes a slightly pronounced COBRA logo, which I found made painting MUCH easier, and one without the raised logo(which lends itself better to decal adhesion). Additionally, I've included two versions of the nunchuck accessories -- one straight (as they were originally produced), and one curved, which (depending on your printing materials) can be printed for display in the backpack without risking damage to the straight set. Please note -- finished construction of this figure will require additional hardware, including T-hook, O-ring, screws, and rivets. All of these items can be found through the links below. I don't have any connection to these sellers -- these are simply what I use for my own custom G.I. Joe builds. NECESSARY HARDWARE: For rivets, I recommend these: https://www.ebay.com/itm/254737351546 For O-rings, T-hooks, and screws, I recommend these: https://www.ebay.com/itm/153067094693 To date, I've only printed this figure on an Elegoo Mars 2 Pro resin printer. I like to print him in white (I've been using Anycubic ECO resin), then stain the pieces before curing. For white resin, I print him at .02 mm layer height, with a 2-second exposure time. I orient the arm and leg pieces at 60 degrees, and have included separate STL files of these pieces in that orientation, including supports. I'm also including the pieces separately, so that you may configure them however they work best in your setup, but these are the trickiest pieces to get right. All of the joints/connections are optimized to eliminate (or at least greatly reduce) the need for sanding.

  • storm shadow
  • gi joe
  • gijoe
  • stormshadow
  • o-ring
  • actionfigure
  • action figure
  • cobra
  • arah
  • destro
  • zartan
  • hasbro
اکشن‌فیگور Storm Shadow با حلقه O (Storm Shadow // GI Joe // O-Ring Action Figure) — فایل پرینتر سه‌بعدی (STL)