اکشن فیگور Han Solo با طرح Ralph McQuarrie، 3.75 اینچی
Starwars Han Solo - Ralph McQuarrie Concept - Vintage 3.75" Style Action Figure
طراح: DESERT-OCTOPUS
قیمت فایل با خرید و تحویل
۱٬۷۰۶٬۰۰۰ تومان
- قیمت ارزی فایل
- ۵ EUR
- معادل تومانی
- ۱٬۴۷۰٬۰۰۰ تومان
- کارمزد خرید
- ۲۳۶٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
🌀⚔️ Han Solo – Ralph McQuarrie Concept – Vintage 3.75” Style Action Figure (3D Printable) A bold reimagining of the smuggler we all know — introducing Han Solo, based on the early concept art by Ralph McQuarrie, now as a Kenner-style 3.75” retro action figure! 🛠️ Figure Features: ✅ Classic 5 points of articulation, true to the vintage Star Wars style ✅ Includes a blaster and an experimental lightsaber accessory, inspired by McQuarrie’s early designs ✅ Comes with a "vinyl-style cape" — a special experimental accessory to test how well it works in future figure designs ✅ Optimized for both FDM and resin 3D printing, with clean part separation and nostalgic proportions ✨ This release continues my exploration of the original Star Wars concept art by Ralph McQuarrie, turning iconic illustrations into physical retro-style figures — made with love and tons of attention to detail. 💬 Let me know what you think about the vinyl-style cape! Would you like to see more figures using this kind of accessory? 🛠️ Recommended Print Settings for Retro-Style Action Figure (Separate Parts) Whether you're printing with resin or filament, here are some ideal settings to get the best results for your retro-style articulated figure: 🧵 FDM Printers (PLA/ABS Filament) Layer Height: 0.12 – 0.20 mm Nozzle Size: 0.4 mm Extruder Temperature: 200–210 °C (PLA) | 230–250 °C (ABS) Bed Temperature: 60 °C (PLA) | 90–100 °C (ABS) Print Speed: 40–60 mm/s Bed Adhesion: Use a raft – highly recommended for parts with no flat base Supports: Enable as needed for overhangs (adjust angle to suit) Retraction: Enabled to prevent stringing 💎 Resin Printers (SLA/DLP) Layer Height: 0.025 – 0.05 mm Initial Exposure Time: 30–60 s (depending on resin/printer) Normal Layer Exposure: 1.5 – 2.5 s per layer Bed Adhesion: Use a raft or solid base in your slicer to support curved/rounded parts Orientation: Tilt parts 30–45° to reduce suction and enhance surface detail Supports: Use medium or light supports and position them to avoid marring visible areas 📌 General Tips: Print parts individually for cleaner results and easier post-processing. Use 0.3 – 0.5 mm tolerance for peg joints or snap-fit connections. Cure resin prints thoroughly before assembly for best durability. Light sanding may help parts fit more smoothly in FDM prints.
- starwars
- have only
- ralph mcquarrie
- concept
- vintage
- 375
- retro
- style
- action figure