فیگور اکشن استاکر، STALKER، GI Joe، O-Ring
STALKER // GI Joe // O-Ring Action Figure
طراح: applesandrice
قیمت فایل با خرید و تحویل
۱٬۲۶۲٬۰۰۰ تومان
- قیمت ارزی فایل
- ۳.۶۱ EUR
- معادل تومانی
- ۱٬۰۶۲٬۰۰۰ تومان
- کارمزد خرید
- ۲۰۰٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
"Functions well under high stress situations. Intelligent. Perceptive. Moves like some sort of jungle cat-silent-fast...strong." ***UPDATE*** Now includes Simplified Swivel-Arms!! Send in the Ranger! Stalker is fully articulated to match his original '82 and subsequent '83 release, he comes complete with recreated accessories!!! This figure is a brand new sculpt, using original figures and accessories for reference (as much as possible). For funsies, I've included both '82 straight-arm AND '83 swivel-arm options. Also included is my new reproduction of his M-32 "Pulverizer" submachine gun! This download includes multiple possible figure configurations, including: - 1982 Straight-Arms with Swivel-Neck Torso and Head; - 1983 Swivel-Arms with Swivel-Neck Torso and Head; - 2024 Vintage Compatible Swivel-Arms, with Ball-Neck Torso and Head. - 2026 Vintage Compatible Simplified Swivel-Arms!! The 1982/1983 options are included in the original (larger) ZIP file, which also includes the figure's legs, hips, and accessories. The 2024 and 2026 components are included in a separate, smaller ZIP file bearing the "BNVC" designation. Please note: legs, hips, and accessories are compatible with each of the above head/torso/arm configurations. The 1982 and 1983 arms are NOT compatible with the ball-neck torso. Please note -- finished construction of this figure will require additional hardware, including T-hook, O-ring, screws, and rivets. All of these items can be found through the links below. I don't have any connection to these sellers -- these are simply what I use for my own custom G.I. Joe builds. NECESSARY HARDWARE: For rivets, I recommend these**: https://www.ebay.com/itm/254737351546 **these may show as "out of stock", but send a message to the seller -- he'll hook you up! :) For O-rings, and screws, I recommend these: https://www.ebay.com/itm/314201886952 For T-hooks, I recommend these: https://www.ebay.com/itm/154574267135 3D printing settings To date, I've only printed my figures on an Elegoo Mars 2 Pro resin printer. I like to print them in white (I've been using an 85/15 mix of AnyCubic and Tenacious), then stain the pieces before curing. For white resin, I print at .02 mm layer height, with a 2-second exposure time. Please make sure to properly calibrate your printer! Prior to curing, I also recommend using a small drill bit to help clean out any excess resin in the rivet/screw holes. I recommend orienting the arm and leg pieces at 30/60 degrees. (Simplified upper arms print well for me at about 150 degrees.) For best results, be sure to orient pieces in order to keep supports away from the figure's joints. All of the joints/connections are optimized to eliminate (or at least greatly reduce) the need for sanding. SETTINGS: Using White AnyCubic ECO resin in an Elegoo Mars 2 Pro printer, I use the following settings: Layer Height: .02 mm Bottom Layer Count: 5 Exposure Time: 2.2 s Bottom Exposure Time: 35 s
- stalker
- ranger
- gijoe
- gi joe
- actionfigure
- action figure
- arah
- cobra
- destro
- zartan
- o-ring
- oring
- vintage
- hasbro
- articulated