بازی مار و مار زنگی
Snake and Rattlesnake
طراح: mcgybeer
قیمت فایل با خرید و تحویل
۱٬۲۶۸٬۰۰۰ تومان
- قیمت ارزی فایل
- ۳.۶۳ EUR
- معادل تومانی
- ۱٬۰۶۸٬۰۰۰ تومان
- کارمزد خرید
- ۲۰۰٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
**Articulated Snake and Rattlesnake!!** Body printed in one piece, with optional tongue and functional rattle. [Watch here some finished examples](https://youtu.be/SiUXJBqRvSc). At the original scale they need just 16 X 16 cm to be printed, but they are more than 80 cm long! Of course, they can be printed as big as you want (for smaller prints some articulations may not work as intended). For belt printers, the articulations work better if the snakes are printed from tail to head. The tongue and rattle are designed to snap fit, but you may need to adjust a bit the scale of these two depending on your printer tolerances. I recommend printing them separately. Check here the timelapse and post printing videos of the [Snake](https://youtu.be/T0s86Ez6udA) and the [Rattlesnake](https://youtu.be/4IJbz-C2iBo). **(*) Skull not included**. It is an authorized modification from Fynngro’s Skull used as decoration (https://www.instagram.com/fynngb/) Check here for [Commercial License](https://www.mcgybeer.xyz/commercial-license) A good first layer is mandatory for the print to succeed. Be sure your printer is calibrated and you have good bed adhesion. I recommend a slow and thick first layer (8 mm/s and 0.3 mm). Good layer cooling is also recommended, as it prevents curling and warping on overhangs.
- snake
- rattlesnake
- reptile
- articulated
- flexi
- flexible
- toy
- fantasy
- japanese