تپانچه کمان‌پرتاب تکرارشونده برای ساچمه 8mm SlingHAMMER

دربارهٔ این مدل

SlingHAMMER is a compact 3D printed repeating crossbow / slingshot pistol for **6mm, 8mm, 10mm or 12mm steel balls** with an integrated magazine for approx. **60 shots (8mm)**. The design is optimized for a **300mm x 300mm** print bed. A Version for **220mm x 220mm** print beds is included. Short presentation of the SlingHAMMER by Joerg Sprave [https://www.youtube.com/watch?v=jKDQfYBglEI](https://www.youtube.com/watch?v=jKDQfYBglEI) [https://www.youtube.com/watch?v=xtF17KhF0D4](https://www.youtube.com/watch?v=xtF17KhF0D4) **Important Notes -> read this before start downloading!** - Before start downloading, making and using this device, make sure it is legal for your age and in your area / country! - I do not assume any liability for damages or injuries of any kind - use at your own risk! - I am not responsible for the consequences of building, possession and using this device! - The arch or rubber used is at the discretion of the builder and will have a significant impact on power and can affect the legal admissibility of the construction! **YOU build it,YOU use it and YOU own it on YOUR own risk and responsibility!** and - Always keep it under lock when not in use and don’t leave it unattended when it is in use! - Keep it away from children and people who will not handle it responsibly! - Protect yourself by wearing safety goggles and protective clothing! - Do not shoot or aim at animals or people! - Use an archery mat or backstop to avoid ricochets or other damage! - The reliability of this build depends on your own building skills and the quality of the printed parts you created! - Shoot only in designated and secured areas - never in public or unauthorized areas! **These files are provided for PERSONAL USE ONLY. It is prohibited to share or redistribute these files or any derivatives / remixes, or to use them for commercial purposes, including selling the printed models.** Have fun! --- Building Tip [Bolt extension for 7 Bolt Magazin] (https://cults3d.com/en/3d-model/various/slinghammer-convertion-kit-7-shoot-arrow-magazine) for the SlingHAMMER from the designer **eheimgartner** available --- **Change Log** **Update - 2023/10/13** - Added some foregrips from the new Design [BBHAMMER](https://cults3d.com/en/3d-model/various/bbhammer-repeating-ball-crossbow-slingshot-with-quick-exchangeable-magazines) as they also fit **Update - 2023/03/02** - updated Building Instructions and Parts List for small print beds version - added "Shaft Handle QuickCocking V2" from the BoltHAMMER **Update - 2023/02/02** added the following additional parts to print - Ball Precision Shaft with Picatinny Rail - Simple adjustable Iron Sight **Update V1.6 - 2023/01/28** - Powerstroke package added This package can be used as an option and increases the power stroke by approx. 4cm and the capacity of the magazine accordingly **Update V1.5 - 2023/01/04** - Added experimental Version of V1.5 for small Print Beds 220mm x 220mm **Update V1.5 - 2023/01/02** - Added a revsion hole to get the ball out if necessery **Update V1.4 - 2023/01/02** - Added AR15 shoulder stock adapter - Added building option for 6mm steel balls **Update V1.3 - 2022/12/29** Misc update for thicker hexnut backwalls **Update V1.2 - 2022/12/26** Added building option for 10mm steel balls. **Update V1.1 - 2022/12/23** Added building option for 12mm steel balls. ___ - The design is optimized for 3D printing with a layer height of 0.2 mm and a print bed of at least **300mm x 300mm**! - All parts can be printed **without any support structure**! - The specified alignment / orientation of the parts on the print bed is crucial for later strength! - Preferred Materials for this print are **PLA, PLA+ or PETG**. - Some parts (e. g. Trigger, Lock and Lever Splint) are recommended to print with 100% infill. - For the best strength and durability, its recommend printing all parts with a wall thickness of 2.25 mm, bottom and top walls thickness of 1.2 - 1.6 mm and infill of at least 30%. - Its also recommend printing at a slightly higher hotend temperature than usual. - The 3D printer should be well calibrated (extruder steps, flowrate, first layer height). - It takes about 50 hours to print all parts (depends on the 3D printer, print settings and the building option you choose).

• bolthammer
• slingshot
• crossbow rifle
• crossbow pistol
• crossbow gun
• archery
• repeating
• crossbow
• adderini
• miniadder
• airsoft