رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

فیگور Semi-Classified B.A.T.S از GI Joe با اتصال O-Ring

Semi-Classified B.A.T.S // GI Joe //O-Ring Figure

طراح: applesandrice

قیمت فایل با خرید و تحویل

۱٬۲۶۲٬۰۰۰ تومان

قیمت ارزی فایل
۳.۶۱ EUR
معادل تومانی
۱٬۰۶۲٬۰۰۰ تومان
کارمزد خرید
۲۰۰٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

It's the Cobra Android Trooper (B.A.T.S.) -- like you've never seen it before!! Combining 80's O-ring action figure goodness with the slick detailing of the modern Classified-era, I present the "Semi-Classified B.A.T.S."!! Fully articulated to match the original '86 ARAH release, this B.A.T.S. comes complete with re-vamped accessories!!! Using a figure scan of the "Classified" version of Cobra's B.A.T.S. that is freely available here: https://www.thingiverse.com/thing:5330381 ... I spent untold hours cleaning up elements of the scan, as well as recreating all joints and internal structures in order to produce a printable, buildable, perfectly functioning "Semi-Classified B.A.T.S." action figure. But what good is a brand new (but kind of old) totally rad action figure if it doesn't have a bunch of tiny plastic things to wave around?? None. None good. Wait -- "none good"? Sheesh. Anyway, it comes with weapons!!! Lots of them!!!! And an optional Boba Fett head!!!!! HOORAY!!!! Please note -- finished construction of this figure will require additional hardware, including T-hook, O-ring, screws, and rivets. All of these items can be found through the links below. I don't have any connection to these sellers -- these are simply what I use for my own custom G.I. Joe builds. NECESSARY HARDWARE: For rivets, I recommend these**: https://www.ebay.com/itm/254737351546 **these may show as "out of stock", but send a message to the seller -- he'll hook you up! :) For O-rings, and screws, I recommend these: https://www.ebay.com/itm/314201886952 For T-hooks, I recommend these: https://www.ebay.com/itm/154574267135 To date, I've only printed this figure on an Elegoo Mars 2 Pro resin printer. I like to print him in white (I've been using Anycubic ECO resin), then stain the pieces before curing. For white resin, I print him at .02 mm layer height, with a 2-second exposure time. Darker resins will need longer exposure time! For resin printing, I recommend orienting the arm and leg pieces at 60 degrees, and have found these to be the trickiest pieces to get just right. I've included STL files of all of the pieces in groups (arm pieces, leg pieces, etc.), rotated and with supports. I'm also including the pieces separately, so that you may configure them however they might work best in your setup. All of the joints/connections are optimized to eliminate (or at least greatly reduce) the need for sanding. Enjoy!

  • bats
  • bat
  • gijoe
  • gi joe
  • o-ring
  • action figure
  • actionfigure
  • cobra
  • arah
  • destro
  • zartan
  • hasbro
  • battle android trooper
  • bobafett
  • boba fett
فیگور Semi-Classified B.A.T.S از GI Joe با اتصال O-Ring (Semi-Classified B.A.T.S // GI Joe //O-Ring Figure) — فایل پرینتر سه‌بعدی (STL)