رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

شمشیر اژدهاکش Guts از Berserk

Replica Guts Sword - Dragon Slayer from Berserk

طراح: Masajd

قیمت فایل با خرید و تحویل

۳۷۷٬۰۰۰ تومان

قیمت ارزی فایل
۰.۶ EUR
معادل تومانی
۱۷۷٬۰۰۰ تومان
کارمزد خرید
۲۰۰٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

Guts Sword - Dragon Slayer from Berserk. I wanted to try and design a full sized sword. Guts sword seemed easy enough to make and paint. At 100% scaling the sword is ~1.5m long and 22cm wide, and weighs about ~3kg. Wall mount available [here](https://www.thingiverse.com/thing:6810936). RudeMcRude has made a much larger version [here](https://www.thingiverse.com/thing:2851787). jt81608 has made a grim version [here](https://www.thingiverse.com/thing:3723803). (I didnt realise either of this had been made before designing mine, I blame the thingiverse search) ** Parts you'll need: ** * A [25mm x 1830mm steel tube.](https://www.homebase.co.uk/rothley-steel-tube-chrome-plated-25mm-x-1.83m/12808042.html) * [Wraps](https://www.amazon.co.uk/GORGECRAFT-Projects-Clothing-Wrapping-Furniture/dp/B0B1CT4R7Y/ref=sr_1_5?dib=eyJ2IjoiMSJ9.HqfNNyj0t-oseNgqAnWVA692OTt1tPzBI2k97poOwwYAwp8T3MK3sGcWq6aRpJx6bR78lbs7VLXtIDKbusbBPZuC1Gtj_D9eNQiMih6AanqhTd9c85wIcqheDNMBpCh1jfbnTuvAyqzIK7TrBZKthWsUq5ijeDnk7-1Q81rLO-aQQnLyRHRMBCevtBOuhcYM2kYA9Byzy8GIBfGFVFpCwAbI27sf55od8niam7I-9M6nzAv4Ne-4KGGsCwRzHfr5S_twfwj_bfo22k1175w_OKVz1I60YML86FHP0XacPcg._xmA5-U23v7VvNC3AWcrAsg3OuP1ial--kn2yMy_CZE&dib_tag=se&keywords=leather%2Bwrap&qid=1716205534&sr=8-5&th=1) **Tools** * [Pipe cutter](https://www.screwfix.com/p/magnusson-3-28mm-manual-multi-material-pipe-cutter/173pr)/ [hacksaw](https://www.screwfix.com/p/magnusson-24tpi-multi-material-hacksaw-12-300mm-/4686v)/ grinder * [Glue](https://www.amazon.co.uk/dp/B00CJ5EO2E?psc=1&smid=A3P5ROKL5A1OLE&ref_=chk_typ_imgToDp) * [Soldering iron](https://www.amazon.co.uk/gp/product/B07X3CZ3FJ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) * [Expanding foam](https://www.screwfix.com/p/no-nonsense-expanding-foam-hand-held-750ml/75470) * Tape Measure ** Instructions ** * Print parts. * Slide all the parts onto the tube. * Using the tape measure, measure the excess tube length (it should be around 50cm). * Cut the tube down to ~1.30m long using the pipe cutter/hacksaw/grinder. Sand the end to remove any sharp bits of metal. * Using the pole as a guide glue Hilt A, Hilt B, and the blade cover together. Dont let the glue stick to the pole! * Using the pole as a guide glue Blade A, Blade B, Blade C, Blade D, and Blade E together. Dont let the glue stick to the pole! * Remove the pole. Let the glue cure for 24 hours. Cut off any excess. * Use the soldering iron to seal up any seams between the parts (I used 300c for PETG). * (Optional) Fill the blade gaps with expanding foam for added strength. You could also fill the tube with weights to try and balance the sword (its quite unwieldy). * (Optional) Let the foam cure for 24 hours. Cut off any excess. * Slide the hilt and blade parts onto the pole. Glue the Blade parts to the Hilt. Allow 24 hours to cure. * Cut off any excess glue. Use a soldering iron to seal up any seams between the 2 parts. Done! For painting, I sanded the whole sword down with a 60 grit, then 120 grit then 180 grit sheet. I then filled any gaps with milliput then primed with some [grey primer](https://www.halfords.com/motoring/paints-and-body-repair/primer/halfords-primer-grey-500ml-473116.html). Once the primer was dry I painted the sword with 3 coats of [silver spray paint](https://www.halfords.com/motoring/paints-and-body-repair/car-spray-paints/halfords-m0-020-silver-metallic-car-spray-paint---400ml-260123.html) and then 2 coats of [black spray paint](https://www.halfords.com/motoring/paints-and-body-repair/car-spray-paints/halfords-m2-130-black-metallic-car-spray-paint---400ml-256043.html) just down the center of the blade. After the paint was dry, I covered the whole sword in [clear lacquer](https://www.halfords.com/motoring/paints-and-body-repair/car-spray-paints/halfords-clear-lacquer-500ml-468843.html) to protect the paint. I then attached the leather to the handle using the glue; the reel in the link is just long enough to wind around the whole handle. *** 08/06/2024 V1.1: Removed infills. 21/07/2024 V2: Decreased hole size from 28.5mm to 26mm. Added Blade cover.

  • anime
  • berserk
  • berserk dragonslayer
  • cosplay
  • cosplay weapon
  • dragon slayer
  • guts
  • replica
  • sword
  • props
  • accessories
  • costume
شمشیر اژدهاکش Guts از Berserk (Replica Guts Sword - Dragon Slayer from Berserk) — فایل پرینتر سه‌بعدی (STL)