رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

افزونه کارتریج فیلتر Recordpower CamVac

Recordpower CamVac filter cartridge add-on

طراح: adrnln

قیمت فایل با خرید و تحویل

۱٬۷۰۶٬۰۰۰ تومان

قیمت ارزی فایل
۵ EUR
معادل تومانی
۱٬۴۷۰٬۰۰۰ تومان
کارمزد خرید
۲۳۶٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

Even if the power and simplicity of the Recordpower CamVacs are outstanding - especially for it's pricepoint - there is a big downside of this device: The filter system. To be more precise, it seems to be from the 90s as there are simply 3 bags (2 times cotton and one paper) used to keep all the dust and dirt in the barrel. Besides the unknown performance of the stock filter, it faces quite fast a reduction of air flow once the fine dust covers the filters. Further, in the big (outer) bag I always had huge amounts of fine dust what I also had to get rid of during emptying the barrel -> "healthy" This led me tot he conclusion to rethink the existing system and create an easy printable, fast replaceable and even washable solution. This upgrade fits on 1, 2 or as in this example 3 motor powered devices - simply print the quantity you need. Further, it can be installed on all camvacs with a width of 140-143mm All parts require no support and should be printed with the flat side on the print bed. The used filter cartridges came in quite handy as the stats are good and they are pretty cheap - I'll put a link below as a reference (no affiliate link). Update 13.11.2025: Additional model uploaded for filter cartridges with 80mm inner diameter. See also for CamVac: https://cults3d.com/en/3d-model/tool/recordpower-camvac-check-valve If you're interested in seing the upgrade installed and tested, I'm happy that Richmond Woodworks put in time and effort to create an awesome video! Just check it out and give him some support if you also like what he does: https://youtu.be/w9ZhfgE8bTA?si=AQ6COk2DElCL5aMG All you need in addition to the 2 3D printed parts are: 1x fine-dust filter suitabe for Kärcher WD2, WD3, MV3,... (https://www.amazon.de/dp/B084JMXX4R?ref_=cm_sw_r_apann_dp_QPYVER4J4XVD59VKES6H ) 1x 140-160mm hose clamp 1x M10 screw 25mm 1x M10 Wing nut TPU mainbody: 0.28mm draft layer heights 3 walls, 4 top and bottom layers Tuned material settings (e.g. temp, speed,...), which are printer related PETG cartridge holder: 0.20 mm strengths layer heights (optional adaptive layer heights) 3 walls, 4 top and bottom layers Tuned material settings (e.g. temp, speed,...), which are printer related

  • camvac
  • shopvac
  • store vac
  • vacuum cleaner
  • filter
  • workshop
  • workshop
  • recordpower
  • record power
  • zyclone
  • cyclone
  • cgv
  • cgv 286
  • cgv 336
  • cgv 386
  • cgv 486
افزونه کارتریج فیلتر Recordpower CamVac (Recordpower CamVac filter cartridge add-on) — فایل پرینتر سه‌بعدی (STL)