کیت ارتقای جعبه کارت Really Annoying شماره 2
Really Annoying Card Container Upgrade Kit #2
طراح: ThinAir3D
قیمت فایل با خرید و تحویل
۷۳۳٬۰۰۰ تومان
- قیمت ارزی فایل
- ۱.۸۱ EUR
- معادل تومانی
- ۵۳۳٬۰۰۰ تومان
- کارمزد خرید
- ۲۰۰٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
This is an upgrade kit for the Really Annoying Card Container and first Upgrade Kit, but it can also be used as a standalone gift box itself! The Really Annoying Box has 3 layers and 134 bolt. The first upgrade kit adds layers 4 and 5 along with 162 additional bolts. This second upgrade kit adds layer 6 with an another additional 370 bolts to make it a grand total of 666 bolts! Link for Original Really Annoying Card Container (134 bolts): https://cults3d.com/en/3d-model/art/really-annoying-card-container Link for first Upgrade Kit (adds 162 bolts): https://cults3d.com/en/3d-model/gadget/really-annoying-card-container-upgrade-kit This box fits the original Really Annoying Box and first upgrade kit inside. but this box can also be used as a standalone gift box. The inner dimensions are: L: 6.9" (177 mm) W: 5.5" (140 mm) H: 3.3" (84 mm) **These designs are uploaded with a non-commercial license. Purchasing this file does not grant you the right to sell commercially. If you would like to consider gaining access to ALL of my models and the rights to print and sell them, you can check out my Patreon at https://www.patreon.com/thinair3D **These are just the settings I used to test the model, feel free to use whatever settings work best for you. FDM or Resin: FDM Scaling: Can be scaled up, bolts likely won't work well if scaled down. Supports: None Infill/Perimeters: 15% infill + 2 perimeters, 3 perimeters for bolts and screwdriver. Nozzle Size: 0.4 Layer Height: 0.2 No supports are needed for this model, just print the pieces in the orientation that they import and assemble after printing. You will need to print all of the pieces, plus 370 bolts. I have included a "thread test" file so you can make sure that the bolts are going to fit into your box before you print all of them! Make sure to print the thread test in the orientation that the file imports in. The female part will be printing vertically, so it needs to be tested in that orientation. File List (15): - box_6a (STL) - box_6b (STL) - box_6_lid (need 2) (STL) - box_6_collar (need 2) (STL) - flat head bolt (STL) - flat head screwdriver (STL) - phillips head bolt (STL) - phillips head screwdriver (STL) - 5.5 mm bolt (STL) - 5.5 mm driver (STL) - 6 mm bolt (STL) - 6 mm driver (STL) - special bolt (STL) - special screwdriver (STL) - annoying_box_thread_test (STL)
- gift box
- gift
- gift card
- prank gift
- prank gift box