رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

جعبه کارت واقعاً اعصاب‌خردکن

Really Annoying Card Container

طراح: ThinAir3D

قیمت فایل با خرید و تحویل

۱٬۲۷۱٬۰۰۰ تومان

قیمت ارزی فایل
۳.۶۴ EUR
معادل تومانی
۱٬۰۷۱٬۰۰۰ تومان
کارمزد خرید
۲۰۰٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

محفظه کارت واقعاً اعصاب‌خردکن؛ نسخه‌ای آزاردهنده‌تر از جعبه هدیه اعصاب‌خردکن. این یکی به‌جای 20 پیچ، 134 پیچ دارد که برای دسترسی به محتویات داخل آن باید بازشان کنید. ابعاد آن تقریباً به‌اندازه کارت هدیه است؛ بنابراین می‌توانید آن را بزرگ‌تر کنید تا وسایل بزرگ‌تری در آن جا شوند. *11/28/2023: چهار مدل جدید پیچ/ابزار اضافه شد. یک کیت ارتقا برای این طرح بارگذاری کرده‌ام که 2 لایه جدید و 162 پیچ دیگر اضافه می‌کند؛ در مجموع 296 پیچ! فایل‌ها را از اینجا پیدا می‌کنید: https://cults3d.com/en/3d-model/gadget/really-annoying-card-container-upgrade-kit *11/8/2024: یک کیت ارتقای دیگر اضافه شد که 370 پیچ دیگر اضافه می‌کند؛ در مجموع 666 پیچ. فایل‌های آن را از اینجا پیدا می‌کنید: https://cults3d.com/en/3d-model/game/really-annoying-card-container-upgrade-kit-2 **این طرح‌ها با مجوز غیرتجاری بارگذاری شده‌اند. خرید این فایل به شما حق فروش تجاری آن را نمی‌دهد. اگر مایلید دسترسی به همه مدل‌های من و حق چاپ و فروش آن‌ها را به دست آورید، می‌توانید صفحه Patreon من را ببینید: https://www.patreon.com/thinair3D **این‌ها فقط تنظیماتی هستند که برای آزمایش مدل استفاده کردم؛ می‌توانید از هر تنظیماتی که برایتان مناسب است استفاده کنید. FDM یا رزین: FDM مقیاس‌گذاری: می‌توان آن را بزرگ کرد؛ احتمالاً پیچ‌ها در صورت کوچک‌کردن، به‌خوبی کار نمی‌کنند. ساپورت: لازم نیست درصد پرشدگی/تعداد دیواره‌ها: 15% پرشدگی + 2 دیواره؛ برای پیچ‌ها و پیچ‌گوشتی 3 دیواره. اندازه نازل: 0.4 ارتفاع لایه: 0.2 برای این مدل به ساپورت نیازی نیست؛ قطعات را در همان جهتی که هنگام واردکردن فایل قرار می‌گیرند چاپ و پس از چاپ مونتاژ کنید. باید همه قطعات، به‌علاوه 134 پیچ را چاپ کنید. پیچ‌گوشتی همراه مدل نیست؛ چون باید خودتان یکی پیدا کنید. (می‌دانید، برای اعصاب‌خردکن‌تر شدن.) *11/28/2023: چهار مدل جدید پیچ/ابزار اضافه کرده‌ام؛ می‌توانید آن‌ها را در فایل .zip با نام annoying bolt variations.zip پیدا کنید. یک فایل «آزمایش رزوه» هم قرار داده‌ام تا پیش از چاپ همه پیچ‌ها مطمئن شوید که پیچ‌ها در جعبه‌تان جا می‌گیرند! فایل آزمایش رزوه را در همان جهتی چاپ کنید که فایل هنگام واردکردن قرار می‌گیرد. بخش مادگی به‌صورت عمودی چاپ می‌شود، بنابراین باید در همین جهت آزمایش شود. فهرست فایل‌ها (10): - bolt (need 134) (STL) - box_1_container (STL) - box_1_lid (STL) - box_2_container (STL) - box_2_lid (STL) - box_2_sleeve (STL) - box_3_bottom (STL) - box_3_top (STL) - annoying_box_thread_test (STL) - annoying_box_screwdriver.stl (اضافه‌شده در 3/16/2023) - annoying bolt variations.zip تاریخچه تغییرات: 11/28/2023: چهار مدل جدید پیچ/ابزار اضافه شد: چهارسو، آچارخور 5.5، آچارخور 6 و سری امنیتی.

متن اصلی طراح (انگلیسی)

The Really Annoying Card Container, the more irritating version of The Annoying Gift Box. Instead of 20 bolts, this one has 134 that have to be removed to get to the contents inside. It is scaled just about gift-card-size, so you can scale up as you want to fit bigger items. *11/28/2023: Added 4 new bolt/tool variations. I have uploaded an upgrade kit to this design that adds 2 new layers and 162 more bolts for a grand total of 296 bolts! You can find the files here: https://cults3d.com/en/3d-model/gadget/really-annoying-card-container-upgrade-kit *11/8/2024: Added another upgrade kit that adds an additional 370 bolts for a grand total of 666 bolts. The files for this can be found here: https://cults3d.com/en/3d-model/game/really-annoying-card-container-upgrade-kit-2 **These designs are uploaded with a non-commercial license. Purchasing this file does not grant you the right to sell commercially. If you would like to consider gaining access to ALL of my models and the rights to print and sell them, you can check out my Patreon at https://www.patreon.com/thinair3D **These are just the settings I used to test the model, feel free to use whatever settings work best for you. FDM or Resin: FDM Scaling: Can be scaled up, bolts likely won't work well if scaled down. Supports: None Infill/Perimeters: 15% infill + 2 perimeters, 3 perimeters for bolts and screwdriver. Nozzle Size: 0.4 Layer Height: 0.2 No supports are needed for this model, just print the pieces in the orientation that they import and assemble after printing. You will need to print all of the pieces, plus 134 bolts. There is no screwdriver included, because find your own. (Ya know, to be more irritating). *11/28/2023: I have added 4 new bolt/tool variations, you can find them in the .zip file annoying bolt variations.zip. I have included a "thread test" file so you can make sure that the bolts are going to fit into your box before you print all of them! Make sure to print the thread test in the orientation that the file imports in. The female part will be printing vertically, so it needs to be tested in that orientation. File List (10): - bolt (need 134) (STL) - box_1_container (STL) - box_1_lid (STL) - box_2_container (STL) - box_2_lid (STL) - box_2_sleeve (STL) - box_3_bottom (STL) - box_3_top (STL) - annoying_box_thread_test (STL) - annoying_box_screwdriver.stl (Added 3/16/2023) - annoying bolt variations.zip Changelog: 11/28/2023: Added 4 new bolt/tool variations: phillips head, 5.5 hex, 6 hex, and security bit

  • gift box
  • gift
  • box
  • toy
  • annoy
  • card box
  • card container
  • container
جعبه کارت واقعاً اعصاب‌خردکن (Really Annoying Card Container) — فایل پرینتر سه‌بعدی (STL)