ابزار تنظیم کمبر، کستر و تواین خودرو RC، مقیاس 1/8 و 1/10
RC CAR SETUP 1/8, 1/10, Camber, Caster, Toe-in / Toe Out
طراح: piotrbiendar
قیمت فایل با خرید و تحویل
۱٬۵۴۹٬۰۰۰ تومان
- قیمت ارزی فایل
- ۴.۵۴ EUR
- معادل تومانی
- ۱٬۳۳۵٬۰۰۰ تومان
- کارمزد خرید
- ۲۱۴٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
The design was made for Traxass Revo 3.3 on Hex 17 axle 12mm. Certainly, it can be used for models of similar and similar dimensions. The set consists of only plastics printed in 3D technology. You need to buy 8 3x10x4 bearings, 20 m3x25 screws, of which 4 must be removed from the head and 4 m3x10. The files contain mounting adapters and tips for m3, m4, m5 and m6. After the suggestions of people from the forum, I changed the mounting of the crossover to the device a bit, adding a pointer to the angle reading. I added stiff shock absorbers. They help when setting the geometry of the model. Once installed, the control arms are parallel to the ground. (make a mirror image when printing). take a look at my other projects: https://cults3d.com/en/users/piotrbiendar/creations The holes for m3 screws must be tapped with a tap
- rc car setup
- camber
- caster
- toe-in
- toe out
- 1/8
- 1/10
- traxxas
- revo