افزاینده یکتکه و نگهدارنده قرقره بالایی Qidi Q1 Pro، بههمراه پایه درپوش و رابط تهویه 100mm
Qidi Q1 Pro single piece top raiser and taller top spool holder models to print on 350+mm printers + lid prop + 100mm vent connector
طراح: gerGoPrint3D
قیمت فایل با خرید و تحویل
۴۹۴٬۰۰۰ تومان
- قیمت ارزی فایل
- ۱ EUR
- معادل تومانی
- ۲۹۴٬۰۰۰ تومان
- کارمزد خرید
- ۲۰۰٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
**Top raiser** is an remix of [Qidi Q1 Pro - top spacer with dovetail (no gluing necessary)](https://www.printables.com/model/908164-qidi-q1-pro-top-spacer-with-dovetail-no-gluing-nec) by RedShark on Printables: * pre-assembled single piece * 10mm taller to be printed on 350x350mm or bigger build surface printers, such as the Sovol SV08. **Top spool holder** is a remix of [](https://wiki.qidi3d.com/en/Q1-Pro/Components/Top-Filament-Holder1) on Qidi's website: * single piece variant of the newer variant of the printer (filament feed on the side) * made it 10mm taller to accommodate the [Q1 Pro Remix of the Qidi Cutter v2.0](https://www.printables.com/model/865926-remix-of-qidi-cutter-v20-body-for-q1-pro) by ScottishBlondie also on Printables. Also to be printed on 350x350mm or bigger build surface printers. Update 1: Added the top lid prop I designed, so we don't have to take off the top lid when printing PLA (as shown in [this video](https://youtu.be/dP6adz6LHX4)) Update 2: Added 100mm exhaust vent connector model for the back (as shown in [this video](https://youtu.be/dP6adz6LHX4)) Top raiser should be printed out of ABS or ASA, minimum PETG for heat resistance. No supports. Mouse ears recommended for corners. Spool holder, print 3 or 4 walls, 15-20% infill. Any material should be good. Needs supports. The top lid prop and the exhaust vent connectors are easy prints, just print them with 3-4 walls, 10-15% infill, oriented as downloaded. No supports. Mouse ear brims or no brims. See my video about these and more → https://youtu.be/ynRUsIDnBwA
- qidi
- q1 pro
- spool holder
- filament holder
- top raiser
- top hat
- raiser
- riser
- top riser