رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

پایه افزایش ارتفاع پرینتر سه‌بعدی Qidi Q2 D3P

Qidi Q2 D3P Riser

طراح: Darren3dPrint

قیمت فایل با خرید و تحویل

۳٬۰۴۳٬۰۰۰ تومان

قیمت ارزی فایل
۸.۹۲ EUR
معادل تومانی
۲٬۶۲۳٬۰۰۰ تومان
کارمزد خرید
۴۲۰٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

NEW: Qidi 5% off | Coupon code: Darren3dPrint CHANGELOG **NEW** added a base and a side shelf for the Qidi Cooler. Link: https://cults3d.com/en/3d-model/tool/d3p-q2-riser-qidi-cooler-base-and-shelf 2026-1-24 Moobien has created some drawer inserts for Q2 nozzles for use with the drawers of the Q2 D3P riser. You can download these here: https://cults3d.com/en/3d-model/tool/q2-nozzle-inserts-for-d3d-riser 2025-12-23 Drawer inserts for the Q2 D3P riser drawers: https://cults3d.com/en/3d-model/tool/d3p-custom-inserts-for-qidi-q2 2025-12-23 Quagzlor designed a Multiboard and Opengrid adapter for the Q2 and we worked together to get one of my sets ported. To avoid confusion Quagzlor model page has both sets. link: https://cults3d.com/en/3d-model/tool/d3p-multiboard-opengrid-adapters-for-qidi-q2 2025-11-14 Increased the side clearance for the bottom cutout for the front right and front left parts. 2025-11-03 I was informed that Qidi has seen fit to move the entry position of the rear PTFE tube higher on the riser they using for the Qidi box. This may be to allow a more gradual curve of the tubes to the print head. I have modified the design to include a PTFE entry hole on the Rear Left part in the approximate location where Qidi place theirs on their riser. I have also included a rear left without a PTFE hole. For those who printed the part already - there is no need to reprint. I have included a zip with a drill guide template that you can use to make the PTFE hole. You will need a 5 mm drill bit (0.2 inch). A photo is included with the zip showing where to place the jig. 2025-10-26 Two new addons - Top mount TPU spool holder and Side mount build plate holders (see links in addons section below) 2025-10-22 Added revised instructions to explain how to install the anti-tilt pins, the rear glass stop and the rear spacer. Modified the glass stop to make it thicker and provide more clearance. 2025-10-12 Added missing front to front hex pegs (plate 11). Added option of rear spacer. There is an intentional indent at the rear of the riser on the ledge for the glass. In the next week or two I will be adding a folding lid handle addon. This will allow the glass lid to be propped up at the front a few centimeters. The notch/indent at the rear is to allow a backstop for the glass. If you do not wish to use this feature you optionally can mount the rear glass spacer as there is a slight gap in the glass at that point due to the notch / indent. Also, I am testing a corner filament guide that would mount on the rear left corner of the riser (as seen from the front). I should be available this week. The corner filament guide has a channel for a PTFE tube. If you mount the external spool holder on the left (when facing the printer) and the corner filament guide then you would have a PTFE tube that rounds the corner and connects directly to the printer PTFE feed. 2025-10-8 Modified the right and left lid holders to widen them and added a removeable glass stop that clips over the bar above the slit where the rear glass slides out of. They are available in the zip file "Lid Support V2 and Glass stop" and I added them to the updated print setting 2025-10-8 2025-10-7 Modified the build plate holders to add a little more width (12.5 mm 0.5 inch on each side) . I added them to the print setting 3mf file and also added a separate print setting 3mf file for these. They are version 2025-10-7 D3P RISER FOR THE QIDI Q2 by Darren 3d Print Having designed a number of risers, I wanted one that offered it all, was modular for customization and also could be easily upgraded in the future. The result is my D3P riser system. The D3P riser system is an innovative and modular riser system for your 3d printer. It features numerous free to download add-ons allowing you to customize your printer and riser like you want. The design of the D3P riser system is patent pending. FEATURES Features of the D3P riser system: • Front and side adjustable vents; • Add-on extensions for dual Qidi boxes units, single, dual and Quad dryers; • Innovative COB LED channels that feature brackets to secure the LEDS in place; • Top unit is set back to allow easy access to the printer from the top; • Sturdy and reinforced construction and design to prevent sagging; • Two large storage drawers with gridfinity style drawer inserts; • Integrated build plate holder for two build plates; • Integrated lid holders; • Multiple add-ons such as a modular tool tray, interchangeable external spool holder and more to come; • Detailed pdf instructions with pictures and steps; • Printing requires little or no support. A regular and a long drawer are included. The long drawer will require a larger printer but is optional. INTELLECTUAL PROPERTY This work is licensed under the standard digital file license. You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, reproducing or distributing the digital file or 3d printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes or copying/reproducing the design by any means).you are not allowed to use the objects in any manner that involves charging money or collecting fees without permission. A patent has been filed for the D3P riser design and it is patent pending. I thank you for your understanding. ADD-ONS The model features a number of add-ons that are free to download. Be sure to bookmark this page as I will be adding to them. NEWEST ADDONS Moobien has created some drawer inserts for Q2 nozzles for use with the drawers of the Q2 D3P riser. You can download these here: https://cults3d.com/en/3d-model/tool/q2-nozzle-inserts-for-d3d-riser Drawer inserts for the Q2 D3P riser drawers: https://cults3d.com/en/3d-model/tool/d3p-custom-inserts-for-qidi-q2 Multiboard and Opengrid https://cults3d.com/en/3d-model/tool/d3p-multiboard-opengrid-adapters-for-qidi-q2 Top mount TPU spool

  • qidi
  • q2
  • qidi riser
  • q2 riser
  • modular riser
  • d3p rier
پایه افزایش ارتفاع پرینتر سه‌بعدی Qidi Q2 D3P (Qidi Q2 D3P Riser) — فایل پرینتر سه‌بعدی (STL)