رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

مدل سه‌بعدی زنجیر کوبایی یک‌تکه

Print-in-Place Cuban Link Chain

طراح: hbx

قیمت فایل با خرید و تحویل

۱٬۲۲۹٬۰۰۰ تومان

قیمت ارزی فایل
۳.۵ EUR
معادل تومانی
۱٬۰۲۹٬۰۰۰ تومان
کارمزد خرید
۲۰۰٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

**Print-in-Place Cuban Link Chain** This Cuban link chain is printed in place, no supports or assembly required! There are two sizes available: 1. Original size: 28mm (1.1") wide, 800mm (31.5") long, and prints in a circle that uses 276x276mm of the print bed. Recommended for larger printers e.g. 300mmx300mm print beds. 2. 250mm version: 26mm (1") wide, 695mm (27.4") long, and prints in a circle that uses 247mmx247mm of the print bed. Recommended for smaller printers like the Bambu Lab X1C or P1S. The corners of the print bed are not used, and can be used for priming the nozzle etc. If your printer is too small, the chain can be scaled down slightly, but be aware of the clearances required for the chain to articulate. Slicer's horizontal size compensation or XY compensation can also be used to shrink the links and increase clearances. The chain is also printed as a complete circle, so please make sure you don't scale it down too much or it wouldn't fit! Ensure your printer is able to print with good bed adhesion. There are slight (but forgiving) overhangs, good part cooling would improve print quality. * 0.15mm or smaller layer heights are recommended for a better surface finish. * 4 or more perimeters are preferred. * Infill is not necessary, but 18% is recommended. * No supports are required. If your nozzle height is not set perfectly, this could result in slightly fused chain links on the first layer. Simply bend them and they should come loose.

  • cuban link chain
  • chain
  • flexi
  • flexible
  • printinplace
  • nosupports
  • fashion
  • jewelry
  • toy
مدل سه‌بعدی زنجیر کوبایی یک‌تکه (Print-in-Place Cuban Link Chain) — فایل پرینتر سه‌بعدی (STL)