رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

محافظ و فاصله‌گذار Petzl ASAP LOCK

Petzl ASAP LOCK Protector/Spacer

طراح: RIGBOARD

قیمت فایل با خرید و تحویل

۴٬۰۹۳٬۰۰۰ تومان

قیمت ارزی فایل
۱۲ EUR
معادل تومانی
۳٬۵۲۸٬۰۰۰ تومان
کارمزد خرید
۵۶۵٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

Physical Prints now from my website: https://rigboard.shop/ Spacer and Protector for the Asap Lock and similar devices. Designed and produced with heavy inspiration from Petzl's original design featured in their tech tips video. For use with a mobile fall arrestor between the pulley and device head when doing a drop loop haul or reeving system. 1. Reduces the risk of rope failure in the critical zone. 2. Separates the ASAP LOCK and the bottom pulley to prevent rubbing 3. Increases the length of the rope between the two ASAP LOCKs (while protecting it): in the event of rope failure, this will leave enough rope to quickly tie a stopper knot below the ASAP LOCK, thus securing the rest of the maneuver. Petzl Article/Tech Tip Linked here: https://www.petzl.com/INT/en/Professional/Rescue--backing-up-a-drop-loop-haul-or-reeve-with-the-ASAP-LOCK?ActivityName=Rescue Use at your own risk. This is not PPE however can influence devices if not used correctly. Designed to be printed diagonally on an A1 Mini. Use supports if your printer bed sizes cannot allow for vertical orientation. PETG works best for strength and to avoid warping in heavy heat. 0.2 Layer height print as a pair. Aprox 2 hour to print. 2/3 Walls, 50% minimum infil.

  • ropeaccess
  • climbing
  • petzl
  • fall arrest
  • access
  • rescue
  • roperescue
محافظ و فاصله‌گذار Petzl ASAP LOCK (Petzl ASAP LOCK Protector/Spacer) — فایل پرینتر سه‌بعدی (STL)