OP1 8K Mini (OP18K mouse shell mod, -8%)
طراح: quad_dmg
قیمت فایل با خرید و تحویل
۳٬۰۹۸٬۰۰۰ تومان
- قیمت ارزی فایل
- ۹.۰۸ EUR
- معادل تومانی
- ۲٬۶۷۰٬۰۰۰ تومان
- کارمزد خرید
- ۴۲۸٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
If you are looking for the wireless variant: [OP1W 4K Mini (OP1W4K mouse shell mod, -8%)](https://cults3d.com/en/3d-model/gadget/op1w-4k-mini-op1w4k-mouse-shell-mod-8-quad_dmg) 8% smaller shell, up to 60% reduction in weight depending on material and configuration. Mouse mod compatible with both the Endgame Gear OP1 8K v1 and v2 PCB. Small mouse feet like dot skates are necessary - the base accommodates up to 8mm diameter dots, 6.5mm is recommended. For fans of the OP1's thinner grip width and the extra finger maneuverability, this mod kicks it up a notch. Unibody construction with six variants: - solid top shell, with side buttons - solid top shell, no side buttons - lightweight top shell, with side buttons - lightweight top shell, with solid clicks and side buttons - lightweight top shell, no side buttons - lightweight top shell, with solid clicks and no side buttons Strongly inspired by Kaua's MAD R to OP1 conversion mod, and designed in part with [NotMe's OP1 Shell](https://www.printables.com/model/1018898-op1-shell/files) and [tsuiha's Kinzu-like OP1 8K conversion mod](https://www.printables.com/model/1613459-like-kinzu-shape-mouse-op18kv2-mod). You may need to manually tap the screw holes if the print comes out too tight. By purchasing, you agree to the following: All purchased .stl model files (File) are exclusively reserved for your personal/private use only. You will not share, distribute, rent and sell the File or items resulting from the File in any way. You will not share, distribute, rent and sell any modification, adaptation and copy of the File for economic or financial gain. You will not include this File as part of another 3D model or file, unless the original author/designer of the File has given you their written approval. **FDM** • Orientation: 135 degree along x-axis, back hump facing down (experiment with orientations, some of the overhangs are especially difficult for FDM to handle) • Tree supports: auto • Solid variants are recommended for FDM due to the scarring on the hump caused by support material. **MJF (recommended)** • Material: PA12 (less rigid, but lighter) or PA12S (less likely to warp, marginally denser)
- op1
- op1 mod
- op18k
- op1 8k
- endgame
- endgame gear
- mouse mod
- mod
- gaming mouse
- mouse