رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

پایه شارژ گلدان Nintendo Switch

Nintendo Switch Plant Stand (Charging) (UPDATED)

طراح: XALT3DDESIGNS

قیمت فایل با خرید و تحویل

۲٬۴۸۴٬۰۰۰ تومان

قیمت ارزی فایل
۷.۲۸ EUR
معادل تومانی
۲٬۱۴۱٬۰۰۰ تومان
کارمزد خرید
۳۴۳٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

-- INCLUDES THE NEW PIRANHA HEAD! -- This is a cool concept I come up with. Thinking of a springtime vibe and thought of joycons are leaves with a Switch flower...idk. But after a few prototypes and some dimensional errors on my part, here is the final product! There is a USB C extension cable that runs through the stem and stores in the base with the port in the back. I DESIGNED IT FOR THIS CABLE (3.3FT) ---> https://www.amazon.com/dp/B071DMMW4J Please route your cable through each piece separately as it sometimes likes to get hung up on the curves. Every piece is made to twist assemble together, BUT, please be sure to GLUE this together. The Rest, StemTop, and StemBottom should be able to simply set flat on a smooth surface while the glue settles. -- PIRANHA HEAD -- There is a short assembly video here--> https://www.instagram.com/p/Cr4EDnXvEEa/ #GAMINGXCULTS UPDATE: - I have found an error with the SPSRest, there wasn't a chamfer on the bottom edges, so I added one and also redesigned the underside a little. - Have also changed the hole diameter for the PotSoil to a little bigger (0.5mm), added as SPSPotSoilv2. - I have designed up a tunnel version of the pot, SPSTunnelShell UPDATE2: - Highly requested for a two piece bottom stem for limited height printers, STL files are SPS2P-StemMiddle and SPS2P-StemBottom. UPDATE3 (01/25/24): - Added SPSPiranha-CULTS3D.3mf file for Bambu printers. The other 3mf files are for Cura. UPDATE4 (08/11/24): - Have reuploaded as a ZIP file that has a folder structure. Added more bases and head variantions. I have included 3MF files for the Rest, StemTop, and StemBottom that should include the support structure. Print the stem pieces with a brim, everything else should be fine with a skirt. 15% cubic infill, 3 walls (my usual settings)

  • nintendo
  • switch
  • oled
  • lite
  • plant
  • stand
  • charge
  • charging
  • spring
  • time
  • springtime
  • pot
  • home
  • house
  • joycon
  • joycons
  • games
  • display
  • piranha
  • head