رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

Low Profile Mod for Micro Camera Gimbal

طراح: ysoldak

قیمت فایل با خرید و تحویل

۱٬۰۸۲٬۰۰۰ تومان

قیمت ارزی فایل
۳ EUR
معادل تومانی
۸۸۲٬۰۰۰ تومان
کارمزد خرید
۲۰۰٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

# ATTENTION! **THIS IS NOT A COMPLETE GIMBAL, ONLY A MOD.** **YOU NEED PARTS FROM [THE ORIGINAL GIMBAL](https://cults3d.com/en/3d-model/gadget/micro-camera-gimbal-ysoldak)**. *This mod is only the grey parts on the picture. The tilt assembly and some internal gears you need to borrow from the original gimbal.* --- This is a low profile variant of the pan assembly for [Micro Camera Gimbal](https://cults3d.com/en/3d-model/gadget/micro-camera-gimbal-ysoldak). The variant is designed for flying wings where the original gimbal may be hard to mount due to its total height. Here, we trade length of the gimbal for height by placing pan servo upside down and behind the camera. Note: You still need some space under the gimbal for camera and tilt servo wires, mind this while mounting the gimbal on your model. ### Dimensions Fully assembled gimbal (LxWxH): 79x44x47.5mm ### Assembly You'll need tilt assembly from [original gimbal](https://cults3d.com/en/3d-model/gadget/micro-camera-gimbal-ysoldak), plus Pan Small and Pan Large gears. Use pictures in "media" folder for assembly hints. Visit our Etsy webshop: https://www.etsy.com/se-en/shop/SkyGadgets Nozzle: 0.2 to 0.4mm Layer height: 0.1mm is recommented, 0.2mm possible Supports: no Material: PLA, PETG, ABS For best results, calibrate your printer extruder and print a calibration cube to ensure dimensional accuracy before printing gimbal parts. Properly calibrated printer and good quality filament shall let you print parts that need no post-processing and can be assembled directly.

  • fpv
  • camera
  • gimbal
  • flying wing
  • pan
  • tilt
  • 360
Low Profile Mod for Micro Camera Gimbal — فایل پرینتر سه‌بعدی (STL)