رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

LETHAL COMPANY SHOTGUN PROP

طراح: LaMakina3D

قیمت فایل با خرید و تحویل

۱٬۵۴۹٬۰۰۰ تومان

قیمت ارزی فایل
۴.۵۴ EUR
معادل تومانی
۱٬۳۳۵٬۰۰۰ تومان
کارمزد خرید
۲۱۴٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CC BY-NC - Attribution - Non commercial — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

Lethal Company Shotgun I created a prop resembling the double-barrel shotgun featured in the latest version 47 update for Lethal Company. The prop includes a functional break action with ejecting shells. It's important to note that this is a non-functional dummy prop, and it does not discharge any projectiles. Also there are 2 version one has a shorter barrel. Hardware Components Requirements: You will require some hardware components, including a pencil, ink spring, and 2 M4 bolts (minimum length of 15 mm), along with 2 nuts for M4. Optionally, you can ask for a custom Allen bolt in sizes such as M3, M5, M6, or M7. Dimensions wide: 9 cm (3.5 Inches) height: 16 cm (6.3 Inches) Length: 46 cm (18.1 Inches) Barrel short: 30 cm (11.8 Inches) Barrel long: 45 cm (17.7 Inches) 5% - 15% most of the parts except for the Hex pins and cylinder pin that is 15% - 35% I used Cubic infill this model is easy to print with little support (only the forearm and others that have the hex hole) for the mechanism part you must first put the spring inside the model "Guard.stl" then the trigger with the hole and finally you put the "Circle Pin" inside the side hole of the "Guard" model after that you glue a little bit the pin ONLY the pin or your whole trigger mechanism won't work glued, after that you put the barrel with the forearm and finally you insert the M4 bolts for each side there is an hole below the forearm so is easier to put the nuts. either way if there are any question don't mind to ask.

  • lethal company
  • shotgun
  • among us
  • nutcracker
  • props
  • cosplays
LETHAL COMPANY SHOTGUN PROP — فایل پرینتر سه‌بعدی (STL)