رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

گوزن موس تنبل

Lazy Moose

طراح: mcgybeer

قیمت فایل با خرید و تحویل

۱٬۰۰۰٬۰۰۰ تومان

قیمت ارزی فایل
۲.۷۲ EUR
معادل تومانی
۸۰۰٬۰۰۰ تومان
کارمزد خرید
۲۰۰٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

**Lazy Moose!!** Print in place with no support and no assembly required. **Just slice and print!** Feel free to scale them up or down as much as you want (the limit is your printer). After printing the Moose, just move the articulations to get them free. **Update**: Added a "By parts" version, for those of you not having a multicolor 3D printer. Note the antlers may need brim to be printed properly. After printing, just glue the antlers to the head (check pictures for correct orientation). [Timelapse + postprinting video](https://youtu.be/b2WljmU1MT0) [Timelapse + postprinting video 2](https://youtu.be/uKwCqwZ6Pqc) Check here for [Commercial License](https://www.mcgybeer.xyz/commercial-license) A good first layer is mandatory for the print to succeed. Be sure your printer is calibrated and you have good bed adhesion. I recommend a slow and thick first layer (8 mm/s and 0.3 mm). Good layer cooling is also recommended, as it prevents curling and warping on overhangs. For more tips, take a look at my [printing tips](https://www.mcgybeer.xyz/printing-tips).

  • moose
  • articulated
  • flexi
  • flexible
  • cute
  • animal
گوزن موس تنبل (Lazy Moose) — فایل پرینتر سه‌بعدی (STL)