رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

ماکت بوک‌نوک کوچه ناکترن، نسخه کوچک‌تر

Knockturn Alley Book Nook, but Smaller

طراح: Cornflake

قیمت فایل با خرید و تحویل

۱٬۷۰۶٬۰۰۰ تومان

قیمت ارزی فایل
۵ EUR
معادل تومانی
۱٬۴۷۰٬۰۰۰ تومان
کارمزد خرید
۲۳۶٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

Update 1/31/2021 - Uploaded un-cut versions of the top and bottom by request. Update 1/23/2021 - Fixed scaling and re-uploaded Facade 2 - Display Shelf This is a remix from https://www.thingiverse.com/thing:398515 It has been scaled down 15% from the original so that all of the parts will fit on an Ender 3 (may have to turn off skirts/brims for some pieces). Approximate completed size is 240mm deep, 200mm tall, and 120mm wide. Picture at top is the full size version. It's the same as this one, just, y'know, bigger. Hardware: Mostly assembled with glue. M4 screws(6-8 mm in length) to attach sides and back panels. All screw holes are appropriate size to be tapped with an M4 tap, but tapping isn't entirely necessary. Made to use a 1 1/16" piano hinge on the back, cut to length, also attached with M4 screws. "Bars" below bowed windows are just straightened paperclips cut to length. Acrylic mirror (cut to 47mm x 90mm) needed for "Facade 5." Printing orientation: Most parts will print best laying flat on their "back." Turn on "Ironing" in Cura for any pieces with brick work for best results. Assembly instructions to come.

  • buildings
  • structures
  • achitecture
  • house
ماکت بوک‌نوک کوچه ناکترن، نسخه کوچک‌تر (Knockturn Alley Book Nook, but Smaller) — فایل پرینتر سه‌بعدی (STL)