مدل مینیگلف، سوراخ ۳
Mini Golf - Hole 3
طراح: DNAdesigns
قیمت فایل با خرید و تحویل
۴۹۴٬۰۰۰ تومان
- قیمت ارزی فایل
- ۱ EUR
- معادل تومانی
- ۲۹۴٬۰۰۰ تومان
- کارمزد خرید
- ۲۰۰٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: CC BY-NC-ND - Attribution - Non commercial - No derivatives — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
This is the 3rd hole the Mini Golf Course collection. https://youtu.be/GRCsjdSqSx0 This hole has been designed: - to be printed in one part. - to be played with a single stroke. - to be printed without supports. You may also check my other designs!! Happy printing;) 1) The most important advice I can give you is to let the "teebox" cool down correctly when you print it. The part contains a spiral spring and if you don't let it cool the spring won't work. 2) NO SUPPORTS, with 0,2 layer height and 10-20% infill (you can also use other settings, those are the ones I used and they worked fine). It should take between 8-10h to print. 3) PLA not PET, there are a lot of overhangs in the designs so I don't recommend using PET. If you like the design please leave a like and if you have any problem with printing settings, etc. feel free to leave a comment or send me a DM. Thanks for your help.
- golf
- minigolf
- interactive
- toy
- nosupports
- par
- sport