ماکت مقیاسدار ناسل موتور جت CATIAV5FTW سازگار با Bambu Kit 006
Ultra Detailed Scale Nacelle for CATIAV5FTW High Bypass Jet Engine (Bambu Kit 006 Compatible)
طراح: RTWILEYRC
قیمت فایل با خرید و تحویل
۳٬۸۹۲٬۰۰۰ تومان
- قیمت ارزی فایل
- ۱۱.۴۱ EUR
- معادل تومانی
- ۳٬۳۵۵٬۰۰۰ تومان
- کارمزد خرید
- ۵۳۷٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
Upgrade your CATIAV5FTW High-Bypass Jet Engine with this ultra-detailed premium nacelle (engine cowling). Designed specifically to fit the popular 3D-printable turbofan model, this multi-part nacelle adds realistic exterior panel lines, access panels, fasteners, exhaust details, and a professional scale-model finish. The nacelle is modeled after the Rolls-Royce Trent 900 nacelle used on the Airbus A380 and is designed specifically for the 3D-printable High-Bypass Jet Engine by CATIAV5FTW (Chris Shakal). It is fully compatible with versions of the engine printed for the Bambu Lab Jet Engine Component Kit 006. REVISION 2 CORE ENGINE COMPATIBILITY This release incorporates Revision 2 of the CATIAV5FTW 3D-printable engine. Revision 2 eliminates most of the supports previously required to print the core engine. I have used CATIAV5FTW’s original model with minimal changes and substitutions. While most of his original design remains intact, several components must be replaced or modified to accommodate the nacelle. Remixed versions of most of these components are included. The remixed components are designed to simplify printing and eliminate or reduce the need for supports. A few CATIAV5FTW components remain in their original form; these are included with my numbering system added for convenience. Ongoing after-sales support and detailed documentation are provided to help you successfully complete the project. IMPORTANT LICENSING INFORMATION This model is released under a strictly non-commercial license. No exceptions. The model may not be sold, redistributed, or used for commercial purposes. DOCUMENTATION AND RELATED MODELS Free documentation and a sample STL are available here: https://cults3d.com/en/3d-model/gadget/high-bypass-engine-nacelle-documentation A simplified version of the nacelle is available here: https://cults3d.com/en/3d-model/gadget/simple-jet-engine-nacelle If you are looking for the remixed CATIAV5FTW core engine components, they are available free here: https://cults3d.com/en/3d-model/various/3d-printable-jet-engine-minimal-printing-supports IMPORTANT: THE NACELLE IS TRENT 900-INSPIRED — THE CORE ENGINE IS NOT Although the nacelle is modeled after the Trent 900, the core engine itself is not intended to represent any particular real-world jet engine. The real Trent 900 uses three counter-rotating spools. The CATIAV5FTW engine has two spools rotating in the same direction. This distinction is intentional and important: the nacelle provides the appearance and external configuration of a Trent 900 installation, while the internal engine remains based on CATIAV5FTW’s original design. THRUST REVERSER This nacelle does not include operating thrust reversers. It is representative of the outer engines on the Airbus A380, which do not use thrust reversers. Functional thrust reversers are available separately: https://cults3d.com/en/3d-model/gadget/functional-thrust-reverser-trent-900 A gearmotor for motorizing the engine is also available: https://cults3d.com/en/3d-model/various/motorized-high-bypass-engine-nacelle BEFORE YOU START While the technical requirements for printing and assembling this model are not particularly demanding, this is a large and complex project. There are a lot of individual components, and many of them are quite large. Some fitting, adjustment, and gluing may be required during assembly. As a general estimate, expect: * Approximately $175 USD in materials and project cost (2025 estimate) * 300+ hours of printing * Significant assembly and finishing time * Patience and attention to detail This is not a quick weekend print. It is intended to be a rewarding, highly detailed scale-model project for builders who are willing to invest the time required to do it properly. IMPORTANT ASSEMBLY NOTE — SWIRL DOME Make sure the TN1-828 SWIRL_DOME_PLATE is installed inside the TN1-703_COMBUSTION_LINING_BODY. I have seen many completed models where the dome plate has been incorrectly installed on the end of the combustion lining body. When installed in the wrong position, the fuel injectors will not align correctly with the swirl dome. The swirl dome plate slides into position from the side using a circular motion. Depending on the fit, adhesive may not even be necessary when it is installed correctly. 3D PRINTING REQUIREMENTS The STL files should already be provided in the recommended print orientation. Because many of the components are large, a printer with approximately a: 300 × 300 × 400 mm build envelope is highly recommended. Optional split versions of selected parts are also provided, allowing the model to be completed on a smaller printer with approximately a: 206 × 206 × 185 mm build volume. BUILT-IN SUPPORTS STL files with an S suffix in the part number contain built-in supports. When using these files, no additional supports should be generated by the slicer. The built-in supports are designed to save printing time and filament and, in many cases, should produce better results than automatically generated slicer supports. IMPORTANT: Follow the recommended printing settings for STL files containing built-in supports, particularly the specified layer height. Some of the built-in supports can be extremely difficult or even impossible to remove if the recommended print settings are not followed. For best results, use the recommended settings exactly as documented. A PROJECT BUILT FOR DETAIL The goal of this nacelle is not simply to cover the engine. It is designed to transform the CATIAV5FTW engine into a highly detailed, display-quality high-bypass turbofan model with the external appearance and character of an A380-era Trent 900 installation. The result is a substantial modeling project with a high level of mechanical and visual detail — intended for builders who enjoy the process as much as the finished engine. The STLs should already be in the correct orientation. The parts are large. At 300mm x 300mm x
- catiav5ftw
- jet engine
- turbofan
- nacelle
- high bypass
- cowling
- bambu lab jet engine
- jet engine kit
- engine cowl
- rc jet
- bambu component kit 006
- aviation 3d print
- scale engine model
- ge90 model
- trent 1000 model