اسباببازی اژدهای سهسر مفصلی
Giant Articulated Dragon with 3 Heads FLEXI WIGGLE PET Chunky DRAGON
طراح: Kevins3D
قیمت فایل با خرید و تحویل
۷۸۶٬۰۰۰ تومان
- قیمت ارزی فایل
- ۱.۹۹ EUR
- معادل تومانی
- ۵۸۶٬۰۰۰ تومان
- کارمزد خرید
- ۲۰۰٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
This is Giant Articulated Dragon with 3 heads that requires No supports. It has 2 Print-in-place parts which need to be glued together (Print-in-place Articulated Dragon) It looks like made from crystals and it is 70 cm (28 inches) long. Please feel free to share images of your prints on this page, I would love to see 'em. Thank you. Check out by [ARTICULATED FROST DRAGON]( https://cults3d.com/en/3d-model/game/articulated-frost-dragon-articulating-flexi-wiggle-pet) Check out [ARTICULATED COBRS WITH 3 HEADS]( https://cults3d.com/en/3d-model/game/articulated-cobra-snake-with-3-heads-flexi-pet-print-in-place) **Print testing, Images and Videos are created by** [Made In Space](https://www.youtube.com/c/MADEINSPACES/featured) **Backstory** This is the legend known as the Dragon which lived in the north pole. If I am not mistaken, this is the only surviving recording of the monster. It is not hard to guess why so few have met him and lived to tell about it. Make sure you have a good first layer or you can use a raft because it has a lot of small parts. Also, make sure your printer is well calibrated or you will end up with a lot of cleaning up. It is best to use a thick first layer (10 mm/s and 0.25 - 0.3 mm). We used a 0.4mm nozzle 0.16 mm layer height Print speed 40 mm/s Print speed 4 LAYERS a raft 10 % infill No supports PLA – 250g Printer Ender 3 v2
- dragon
- giant dragon
- articulated
- flexi
- no supports
- crystal dragon
- frost dragon
- ice