Genshin Impact - Verdict
طراح: Goowah
قیمت فایل با خرید و تحویل
۷۸۸٬۰۰۰ تومان
- قیمت ارزی فایل
- ۲ EUR
- معادل تومانی
- ۵۸۸٬۰۰۰ تومان
- کارمزد خرید
- ۲۰۰٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
This model is divided into 3 main parts, Pole, Blade A, and Blade B. Each part is cut into parts and pieces to fit in a printer with a dimension of 200mm x 200mm x 200mm. This is a huge prop that will need a lot of time and patience. It is not an easy prop to make especially if you are new to crafting. The pole is quite straightforward to craft. However, it is not the same for the blade. Blade A and Blade B have curve tunnel punches on them. You will need flexible material such as an iron rod for the bone and alignment or drill a straight tunnel using the existing tunnel as a guide. There are pictures with parts labeled to their file names in the preview section which you can refer to. Please make sure you understand the picture before proceeding. I also include the combined version just in case you need it. The accessories, "acc" are separated into different parts for an easier painting process. The cavities on acc 2,3, and 4 are made specifically to match the body, therefore please make sure the same scales are used when doing the scale. Acc 1 can be replaced with a ready-made rose, if you can find one. The connection between the pole and the blade is quite fragile as the connection point is quite small and this is the part that makes the whole crafting process difficult. Please make sure to print the blade using infill as low as possible to reduce the weight. You can also bridge additional support on the blade to the body using transparent acrylic or other methods that you can think of. Once all the parts are crafted, glue them together to complete the prop. For scaling, please use the same scale for all the parts. Cheers and Happy Printing! Dimension: 1595.79mm x 582.39mm x 126.68mm
- genshin impact
- fontaine
- toy
- cosplay
- claymore
- halberd
- axe
- verdict
- navia
- cosplay_prop