رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

Gandalf the Grey Rivendell Staff

طراح: 3D-mon

قیمت فایل با خرید و تحویل

۱٬۷۰۶٬۰۰۰ تومان

قیمت ارزی فایل
۵ EUR
معادل تومانی
۱٬۴۷۰٬۰۰۰ تومان
کارمزد خرید
۲۳۶٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

This is a digital 3D printable model of **Gandalf the Grey's Rivendell Staff** from **The Lord of the Rings** which he used to defeat Balrog. 📦 **Included Files** - STL (cut for 200mm printer beds) - Assembled OBJ file (for easy scaling) - 3MF pre-supported, print-ready file - We recommend printing the cut version and inserting a **1/2 inch (or 12 mm) wooden rod** that is 1540 mm long into the 13mm hole. **SIZE** At 100% scale, the model’s dimensions are approximate: Width 190 mm Length 83 mm Height 1655 mm You can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well. We try to make the models in a way that uses as little support material as possible. This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc. We use hex-pegs (included in the files) that will help you connect the cut pieces of the model. Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area. This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations [here](https://3d-mon.com/links/) [creation saruman-staff-3d-mon] We use these settings for most of our prints: Layer height 0.15 mm Infill 15% Supports 45° For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion. Printing settings will vary greatly depending on your specific printer.

  • gandalf
  • grey staff
  • hobbit
  • movie
  • film
  • fantasy
  • the lord of the ring
  • staff
  • cosplay
  • 3d print