رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

قطعه پایینی M4 برای ایرسافت Firewad AAP01

Firewad AAP01 M4 Lower Airsoft

طراح: Firewad

قیمت فایل با خرید و تحویل

۵٬۴۵۵٬۰۰۰ تومان

قیمت ارزی فایل
۱۵.۹۹ EUR
معادل تومانی
۴٬۷۰۲٬۰۰۰ تومان
کارمزد خرید
۷۵۳٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

Files and hardware are also available at a discount on my website https://firewad.com After 6 months of development, I'm excited to share this M4 Lower design with you! This kit converts your AAP-01 to an M4 and lets you use AEG magazines. An HPA setup is not required; this kit also works with regular green gas magazines! But how does the magazine feed from the front? A track runs internally that guides the BBs from the magazine to the chamber! Here's a video I made that showcases this: https://youtube.com/shorts/xHNUxEhuDn8?si=dD-6RrmzmLXn-3Qa Throughout this project, the #1 priority and biggest challenge was to make it feed as smoothly and consistently as possible. After months of prototyping different designs, I achieved my goal. This HPA Lower uses a plastic PTFE tube that smoothly transports the BBs from the magazine to the chamber, letting you fire full auto without issue. If you can't find this tube, you can 3d print it instead, which also works well (I highly recommend getting the PTFE tube for ultimate smoothness). You can find more information and assembly instructions in my Discord server: https://discord.gg/B5KFRRkb8R Key Features: - Feeds from AEG M4 magazines (Use PTS mags is recommended for best feeding) - Large window lets you see the BBs Feed - BB latch holds BBs in place when removing the magazine - Easy to assemble and disassemble for maintanace and cleaning (only 2 screws) - Works with green gas or HPA (HPA is recommended) Things you will need: Required: 2 x countersunk screw M3*12 1 x countersunk screw M2*8 1 x countersunk screw M4*20 2 x M3 nut 1 x M4 nut 1 x AEG M4 magazine catch 1 x pen spring (4 x 10 x 0.4mm) Optional parts: 1 x HPA fitting for we/kj gas magazine (This is to convert to HPA, buy from airsoft shops or here: https://www.aliexpress.com/i/1005006750796503.html ) 1 x PTFE tube 8mm OD 6mm ID x 85mm 4 x Panhead M4*6 (for Panel Grips) I also sell a hardware pack that includes all of this: https://firewad.com/products/aap-01-m4-lower-hardware-pack Feel free to join my server and ask me any questions before downloading! Otherwise, here are some common questions I've gotten. FAQS: Q: I don't have an HPA system, can I use green gas magazines? A: Yes! You can still use green gas magazines! Q: Will it fit on my printer? A: The parts can fit on a printer as small as the A1 mini (180mm x 180mm x 180mm) Q: Will all the BBs fall out when I take out the magazine? A: No, there is a BB latch that stops the BBs from falling out. There is also a little button inside the magwell that releases all the BBs. SAFETY DISCLAIMER: Always wear proper face protection when playing airsoft, especially with 3d printed parts! 3d printed parts are more likely to break, so please be careful! Materials: PLA, *PLA+, PETG, ABS, ASA*, ABS-GF, PA-CF Nozzle Diameter: 0.2mm, *0.4mm*, 0.6mm Layer Height: ≤0.20mm Wall Loops: 6 Infill: Gyroid 40% *Recommend in Bold

  • airsoft
  • aap-01
  • aap
  • aap01
  • aapo1
  • m4 lower
  • firewad
  • hpa
  • speedsoft
  • cqb