فیگور اکشن فایرفلای، Firefly، GI Joe، O-Ring
Firefly // GI Joe // O-Ring Action Figure
طراح: applesandrice
قیمت فایل با خرید و تحویل
۱٬۲۶۲٬۰۰۰ تومان
- قیمت ارزی فایل
- ۳.۶۱ EUR
- معادل تومانی
- ۱٬۰۶۲٬۰۰۰ تومان
- کارمزد خرید
- ۲۰۰٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
"Even COBRA Commander doesn't know much about Firefly. His fees are paid into a numbered Swiss bank account and are always payable in advance. He makes no guarantees and gives no refunds." My Firefly figure is a brand new sculpt, using the original figure, card art, and accessories for reference. As well as a ball-neck head and simplified swivel arms, I've recreated (and upgraded!) his accessories, which include a Demolition Backpack (with removable cover), Sub-Machine Gun, Walkie-Talkie, and Pistol (which can be stored in his sidearm holster)!! Hooray!!! Please note -- finished construction of this figure will require additional hardware, including T-hook, O-ring, screws, and rivets. All of these items can be found through the links below. I don't have any connection to these sellers -- these are simply what I use for my own custom G.I. Joe builds. NECESSARY HARDWARE: For rivets, I recommend these**: https://www.ebay.com/itm/254737351546 **these may show as "out of stock", but send a message to the seller -- he'll hook you up! :) For O-rings, and screws, I recommend these: https://www.ebay.com/itm/314201886952 For T-hooks, I recommend these: https://www.ebay.com/itm/154574267135 To date, I've only printed my figures on an Elegoo Mars 2 Pro resin printer. I like to print them in white (I've been using an 85/15 mix of AnyCubic and Tenacious), then stain the pieces before curing. For white resin, I print at .02 mm layer height, with a 2-second exposure time. Please make sure to properly calibrate your printer! Prior to curing, I also recommend using a small drill bit to help clean out any excess resin in the rivet/screw holes. I recommend orienting the arm and leg pieces at 30/60 degrees. (Simplified upper arms print well for me at about 150 degrees.) For best results, be sure to orient pieces in order to keep supports away from the figure's joints. All of the joints/connections are optimized to eliminate (or at least greatly reduce) the need for sanding.
- gijoe
- gi joe
- actionfigure
- action figure
- action force
- actionforce
- cobra
- arah
- vintage
- toy soldier
- o-ring
- hasbro
- articulated
- destro
- zartan
- saboteur