سینیهای رویهمچین قطعات کوچک و پروژه FAST-PRINT، حالت گلدانی
FAST-PRINT STACKABLE SMALL PARTS / PROJECT TRAYS (VASE MODE)
طراح: LR3DUK
قیمت فایل با خرید و تحویل
۱٬۰۸۵٬۰۰۰ تومان
- قیمت ارزی فایل
- ۳.۰۱ EUR
- معادل تومانی
- ۸۸۵٬۰۰۰ تومان
- کارمزد خرید
- ۲۰۰٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
These stackable small parts trays have been specifically designed to print in ‘vase mode’ to allow for very fast printing and low filament usage, whilst maximising strength. They are ideal for any engineer, maker or hobbyist to keep their small parts and tools organised and easily accessible. The trays are especially useful for maximising workspace whilst working on a number of ongoing projects, whilst keeping all required small parts for each project together. Due to the speed at which these can be printed, a large set of trays can be produced in very little time and using only a small amount of filament. The trays are available in Small (185mm x 125mm) and Large (185 x 227mm) sizes, which can be stacked together (two small trays = one large tray). Extra-deep versions have also been made available. In total, there are 16 different versions available at launch, and I plan to add more later (please ask if you have a specific layout requirement). As the trays are printed in vase mode, one end will be ‘open’, I have included an end cap for each version which can be used to create a more finished look, but these are entirely optional. PLEASE NOTE: These files are provided for PERSONAL USE ONLY. It is prohibited to share or redistribute these files or any derivatives, or to use them for commercial purposes, including selling the printed models. Copyright © P.S. If anyone would like to post a photo of their prints, I would love to see them. :-) Also, please check out my other fast printing designs, and keep checking back or follow me, as I have more on the way soon. The trays have been designed to print using ‘vase mode’ ('Spiralize outer contour’ in Cura , 'Spiral Vase' in most other slicers). A line width of 0.8mm is recommended for optimal strength, and I use a 0.32mm layer height to minimise print times. No supports or infill are required. It is also possible to print the trays in non-vase mode, which will add strength but significantly increase print times. The optional end caps should be printed in non-vase mode.
- parts trays
- trays
- project
- storage
- stackable
- fast
- fast print
- fast printing
- vase mode
- stack
- organiser
- organizer
- stacking
- bin
- box