رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

مدل سه‌بعدی خشاب‌گذار برقی ایرسافت

Electronic airsoft speed loader

طراح: DumboDesign

قیمت فایل با خرید و تحویل

۲٬۹۷۱٬۰۰۰ تومان

قیمت ارزی فایل
۸.۷۱ EUR
معادل تومانی
۲٬۵۶۱٬۰۰۰ تومان
کارمزد خرید
۴۱۰٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

Electronic airsoft speed loader have chosen to post the raw file, you can change it yourself if that is your interest, if you buy this product, you must be 100 percent sure that your printer prints 100 percent on target and for the drawing, the drawing is so precise that there is no room for the slightest deviation in the print. ! many new magazines have come on the market since this one was drawn. since there have been many new magazines and with much tighter springs, it is not certain that this one can fill them completely. Design by Designandprint. here's what you need. 1 - screwdriver sandpaper strong glue 5 - 5mm screws with fine thread 2 - 3 mm screws with fine thread Servomotor 35 KG with some motor you have to modify, then you have to remove the pin and circuit board insinde, and the stop pins so it can spin 360 degree. you will fine many videos on youtube how to do that a piece of a inner barrel driven by 7,4 lipo Assambly video https://www.youtube.com/watch?v=Ulyn4jaF5LI&t=298s&ab_channel=DesignAndPrint it's been a few years since I designed this so I don't know if it can hold up to the new magazines that are on the market. since they have got a stronger spring azurefilm PETG temp 225 bed 80 wall 5 infil 20

  • airsoft
  • airsoft speedloader
  • speedloader
  • electronic airsoft
  • electronic airsoft speed loader
  • speed lader
مدل سه‌بعدی خشاب‌گذار برقی ایرسافت (Electronic airsoft speed loader) — فایل پرینتر سه‌بعدی (STL)