پایه چکهگیر Elegoo Saturn 3 Ultra/Mars 4 Ultra
Drip-mount for Elegoo Saturn 3 Ultra/Mars 4 Ultra
طراح: Baremeg10
قیمت فایل با خرید و تحویل
۶۴۱٬۰۰۰ تومان
- قیمت ارزی فایل
- ۱.۵ EUR
- معادل تومانی
- ۴۴۱٬۰۰۰ تومان
- کارمزد خرید
- ۲۰۰٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
This is a drip-mount for Elegoo Saturn 3 Ultra and Mars 4 Ultra. The drip-mount is tilting the build plate in two axis making the drip point on one corner. The design is made so that you don't need to take it off when printing and so that it will not dip into the resin when printing. To mount the drip-mount press it on the build plate and it should snap on with a small "click". There is two files included, one regular STL for printing on FDM printers and one STL with a hole to eliminate suction effect for printing on Resin printers The STL's needs to be reoriented according to picture above for the best printability. Only tested to print in ABS **Key features** - Tilts build plate in two axis - Snap on - No need to remove mount when printing - No support needed when printing - Large flat area for easy bed adhesion when printing **For FDM printers:** Layer Height: 0,2 Nozle: 0,4 Infill: 40% cubic Walls: 3 Top/bottom: 5 layers Support: No **For Resin printers** I have not enough experience with resin printing to suggest print settings. See makes for tips.
- mount
- resin printer
- 3d printer
- resin
- saturn
- ultra
- elegoo
- build plate
- mars