چراغ اژدهای آتشین
Dragon Flame Lamp
طراح: 3D-mon
قیمت فایل با خرید و تحویل
۲٬۸۰۴٬۰۰۰ تومان
- قیمت ارزی فایل
- ۸.۲۲ EUR
- معادل تومانی
- ۲٬۴۱۷٬۰۰۰ تومان
- کارمزد خرید
- ۳۸۷٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: CU-ND - Commercial Use - No Derivative — فروش محصول چاپشده مجاز است
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
Digital 3D print model of a Dragon Lamp inspired by **Game of Thrones: House of the Dragon**. 🐉 These files are designed to work with any LED lights, making them super easy to set up. 💡 For the larger Dragon lamp, I used the [IKEA KÖLVATTEN](https://www.ikea.com/cz/cs/p/koelvatten-led-bodove-osvetleni-bila-na-baterie-80568989/) LED light, and for the smaller one, I used the [IKEA KAPPLAKE](https://www.ikea.com/cz/cs/p/kapplake-led-bodove-osvetleni-bila-20543157/). 📦 **Included Files** - Large Dragon Lamp STL files (split and pre-oriented for 220mm printer beds) - Smaller Dragon Lamp STL files (prints without cuts, also pre-oriented) - **Pre-supported print-ready 3MF files for both lamps** 📏 **3D Model Dimensions** The large Lamp is 45 cm tall, and the smaller dragon lamp is about 22 cm. You can scale the lamps to any size you want in your slicer. :) Of course, you can use any colors you like! I went with green and blue dragons inspired by Vhagar and Dreamfyre. This fan-made model was brought to life by **3Demon**, a team of modeling and 3D printing enthusiasts based in Prague, Czech Republic. We've also made this dragon [**book nook**](https://3d-mon.com/collections/frontpage/products/flying-dragon-book-nook) that looks like it's floating around your bookshelf! Check out more of our creations or join our community [here](https://3d-mon.com/links/). [creation flying-dragon-book-nook] You can use the pre-sliced 3MF files or slice the STL files yourself. As a good starting point, I recommend these settings: - Layer height: **0.15 mm** - Infill: **5% gyroid** (for the dragons) - Supports: **Organic, 30°** - **5 mm brim** (for the dragons) The large dragon lamp uses **278 g** of filament for the dragon (I used **Prusament Galaxy Green PLA**) and **272 g** of **transparent red PETG** for the flame.
- stl
- 3dprint
- dragon
- lamp
- light
- fire
- dreamfyre
- vhagar
- flying
- fantasy
- decor