رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

دم متحرک شیطانی

Devil Tail articulated

طراح: morobuilds

قیمت فایل با خرید و تحویل

۴٬۲۶۳٬۰۰۰ تومان

قیمت ارزی فایل
۱۲.۵ EUR
معادل تومانی
۳٬۶۷۵٬۰۰۰ تومان
کارمزد خرید
۵۸۸٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

*This is NOT a physical item; this listing includes only the 3D print files!* Articulated Tail for Cosplay, STL Files. Instructions included; requires 3 x 4x12mm screws and washers, 1 x 2x12mm screw, a 6mm-diameter rubber extension cord at least 110cm long, and a belt of your choice to make it wearable. Full size. 14–15 pieces depending on the base version. There is also a version available for shorter people or if you need more legroom with interchangeable base parts! Simply print the Short_base1 & Short_base2 instead of the standard base. Requires about 700g of filament Total print time about 80h (60mms average) *For personal use only!!* Materials: PLA+, PETG (TPU only with a multi-filament printer) Layer height: 0.16 - 0.2 mm Wall count: 2 - 3 Infill: 5 - 15% Gyroid Support: 35–50° Tree Supports (wider support for the small and tall pieces) Ironing: NO Bed Adhesion: 10 mm brim • I recommend 2 walls and a 5–10% gyroid infill. • It’s easiest to print the parts lying flat on the joint side. It’s also possible to lower the part by 0.5mm to ensure proper contact with the print bed.

  • baldur's gate
  • bg3
  • bg3 cosplay
  • cosplay tail
  • demon tail
  • diablo cosplay
  • lillith cosplay
  • devil tail
  • tiefling
دم متحرک شیطانی (Devil Tail articulated) — فایل پرینتر سه‌بعدی (STL)