پایه دماسبی جداشونده برای کلاهگیس
Detachable Ponytail base for Wigs
طراح: cegan
قیمت فایل با خرید و تحویل
۴۶۸٬۰۰۰ تومان
- قیمت ارزی فایل
- ۰.۹۱ EUR
- معادل تومانی
- ۲۶۸٬۰۰۰ تومان
- کارمزد خرید
- ۲۰۰٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
Excuse the bad photos. These are simple STL models to go inside cosplay wigs that make ponytails, buns, and other hairstyles detachable. The ZIP file has everything in it, both small and large size as well as copies of everything that has space for neodymium button magnets (14mm diameter 3mm thick). I recommend printing the base (the X with a cylinder coming out) with 4-5 walls and 15% infill, and the spheres/ellipsoids with 3 walls 5% infill to save filament. There is a smaller version and larger version, please make sure to print the right size base to go with the attachment (they should have _small and _large at the end of each file) I've also made duplicates of all files that include space for neodymium magnets inside the attachments. They're for a specific size magnet (14mm in diameter, 3mm thick) - I get them from MAGXCENE on amazon but they're probably available elsewhere too. This is for hairstyles that are upside down, to hold them together/make sure they don't fall off if gravity isn't working in your favor. Please use cyanoacrylate (superglue) to attach them, not hot glue. Please reach out to me with any questions!
- cosplay
- wig
- detachable
- ponytail
- bun
- base
- connector