ماکت تفنگ Desert Eagle 50AE
Desert Eagle 50AE Replica
طراح: Ekcnheb
قیمت فایل با خرید و تحویل
۶٬۲۸۰٬۰۰۰ تومان
- قیمت ارزی فایل
- ۱۸.۴۱ EUR
- معادل تومانی
- ۵٬۴۱۳٬۰۰۰ تومان
- کارمزد خرید
- ۸۶۷٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
**Important before printing** ⚠️ Clearance/tolerance is built into the model so with a properly tuned printer there should be no sanding (except for cleaning any print imperfections) ⚠️ Do not add supports into circular holes such as pin holes as removing them can be difficult and can result in inaccurate dimensions (no supports in arch style overhangs doesn't affect print quality!) ⚠️ This model is an educational toy/reference model only and is NOT a real firearm, for safety, dummy cartridges and chamber are slightly different to the real gun. **Included files** 📁 .stl files folder 📄 DesertEagle.step **Youtube** Channel ▶️ https://www.youtube.com/channel/UCJ7shBwVjjkY5EgYF5Xr-wg Model video ▶️ https://www.youtube.com/watch?v=JwNWTWoeC-o&t=54s **Updates** **Other** If you have any problems please message me If you have any model requests send me an email. **Wiki on real firearm** The Desert Eagle is a gas-operated, semi-automatic pistol known for chambering the .50 Action Express, the largest centerfire cartridge of any magazine-fed, self-loading pistol. Magnum Research Inc. (MRI) designed and developed the Desert Eagle. The design was further refined by (and was also manufactured by) Israel Military Industries (IMI), until 1995, when MRI shifted the manufacturing contract to Saco Defense, in Saco, Maine. In 1998, MRI moved manufacturing back to IMI, which later commercialized its small arms branch under the name Israel Weapon Industries. Since December 2009, the Desert Eagle pistol has been produced in the United States at MRI's Pillager, Minnesota, facility. Kahr Arms acquired Magnum Research in 2010. **Print settings** 0.15mm used on internal components (optional) 0.20mm on everything else Any pins that have a diameter of 2mm or less, cutting a piece of filament off the roll works easier than trying to print a tiny pin. Again, do not add supports to circular holes such as pin holes as removing them can be difficult and can result in inaccurate dimensions, it will make your life easier!
- desert eagle
- working
- toy gun