رفتن به محتوای اصلی
ارسالات ترکیه: ۸ تا ۱۲ روز کاری

مدل کلاه‌خودهای Guy از Daft Punk

Daft Punk Guy helmets

طراح: 3DDinosaur

قیمت فایل با خرید و تحویل

۱۳٬۹۸۷٬۰۰۰ تومان

قیمت ارزی فایل
۴۱.۰۱ EUR
معادل تومانی
۱۲٬۰۵۷٬۰۰۰ تومان
کارمزد خرید
۱٬۹۳۰٬۰۰۰ تومان

بعد از پرداخت، فایل را برایتان می‌خریم و در صفحهٔ همین سفارش در حساب شما برای دانلود می‌گذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یک‌بار گرفته شود.

مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپ‌شده مجاز نیست

این طرح کار طراح آن است و مجوز استفاده‌اش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.

دربارهٔ این مدل

**>> Links for Guy [Discovery](https://cults3d.com/en/3d-model/various/guy-discovery-only-ee8d7b85b13e4890d257), [HAA](https://cults3d.com/en/3d-model/various/guy-haa-only-a7237bd41d6170569ba8) or [RAM](https://cults3d.com/en/3d-model/various/guy-ram-only-ce9863cb8173c6360e04) only <<** Led Rig (LR) parts fit the same for Discovery and HAA helmets. Led rig (HAA only) was designed to be a customizable see through 'visor' / mockup display, and can also be used as a template for the electronics. Contact me if you need custom parts for your led rig project. You can try to print the matrix display on its side with support blockers for the led holes. **Overall tolerances are tight. Better sanding off some material than having a gap. Led holes have a 0.2mm clearance, even so, test fit scaling before printing a bunch of leds.** Disposable clip system to protect main parts: if the clip breaks you simply print another one. You can also glue / screw (M3x3 inserts) everything in place. The helmets were modeled over reference images, keeping symmetry and the "feel" from the originals, with spare space to fit the led assembly in the HAA model. Size wise they are close to the real ones, with a head opening of about 170mm in "diameter" from ear to ear. Should fit most heads. Note that rescaling HAA parts will also affect the LEDs assembly / spacing. You'll have access to split parts for the helmets, glove plates, visor vacuum forming templates, cutouts outlines for the led rig and more. (If you miss something in the previews, it's because files over 30 MB do not render) Glove plate pieces are numbered to identify each finger position. If you have a taller 3D printer, you can rotate some pieces (like the visor, using supports instead of placing it over a flat surface) to take advantage of printer resolution and avoid too much support material. Especially the glove plates, you should print them in a vertical orientation, with anchoring sports at the base, to take advantage of layer resolution. Place the fingers next to each other to avoid stringing and not get them knocked off. The visor forming template has a thicker shell to help hold its shape and make rejoining the parts easy in case you need to split fit for your printer. You'll probably want to fill it with plaster or print solid so as it's not crushed when vacuum forming. The model is already scaled down 0.5mm to ensure the part will fit after forming. It can be split into base and visor interface, to print the first with plastic and the interface with resin, for better surface heat protection. Hope you have fun with the project! : )

  • daft punk
  • guy helmet
  • daft punk helmet
مدل کلاه‌خودهای Guy از Daft Punk (Daft Punk Guy helmets) — فایل پرینتر سه‌بعدی (STL)