لیوان مکعبی
Cup of Cubes
طراح: abbymath
قیمت فایل با خرید و تحویل
۷۳۶٬۰۰۰ تومان
- قیمت ارزی فایل
- ۱.۸۲ EUR
- معادل تومانی
- ۵۳۶٬۰۰۰ تومان
- کارمزد خرید
- ۲۰۰٬۰۰۰ تومان
بعد از پرداخت، فایل را برایتان میخریم و در صفحهٔ همین سفارش در حساب شما برای دانلود میگذاریم. چند فایل را با هم در سبد بخرید تا کارمزد یکبار گرفته شود.
مجوز: CULTS PU - Private Use — فقط استفادهٔ شخصی؛ فروش محصول چاپشده مجاز نیست
این طرح کار طراح آن است و مجوز استفادهاش همان مجوز طراح است؛ پخش یا فروش خود فایل مجاز نیست.
دربارهٔ این مدل
--- **Check out some of my newer models inspired by this original Cup of Cubes: [Scales Texture Bundled Set](https://cults3d.com/en/3d-model/home/scales-texture-bundled-set).** See photo at bottom of post. --- Having a little fun with a vase design that turned out to be more like a cup. I built this with cubes. The full model is included, but the prints in most photos are vase mode with printing ending at 110 mm. Also see print settings below. **Now available to purchase printed and shipped to you through Vulkaza!** [Cup of Cubes on Vulkaza](https://beta.vulkaza.com/products/cup-of-cubes) OR [My Full Vulkaza Collection](https://beta.vulkaza.com/collections/abbymath) On Cults3D: [My Vases and Cups Collection](https://cults3d.com/en/design-collections/abbymath/vases-cups) --- ## Update **Version 2 included with download.** When printing the original in vase mode, I found that the inside of the cup had lots of small ledges that seemed unnecessary. They look pretty, but add to print time and do make the print somewhat more challenging. I changed an aspect of the model design by 1 degree and that shifted the cubes enough to close a small gap that caused the internal ledges. The updated model is labeled "Version 2." For Version 2, I printed with the same settings as listed below. The last 5 photos compare models: Original on left and Version 2 on right. Even though the difference on the outside is subtle, I decided to keep both models in this post since some may find the original more appealing. Also, the bulk of the photos are the original version. --- ## Not for commercial use. No derivatives. See © link below. --- Full model is approximately 90 x 90 x 118 mm. I set "Merge all outlines into a single solid model" and printed in vase mode up to a height of 110 mm. For vase mode, I used 0.15 mm layer height with 5 solid bottom layers, 1 perimeter and 0% infill. **Be sure to look through all of the photos.** The purple ones are Version 2 printed with 3 perimeters at 0.3 mm layer height. Stronger result with approximately the same print time. The yellow one in the photos is the full model. This was printed with 0.3 mm layer height and 0% infill (after 15% infill for the base). NOTE: This had "Merge to single model" deselected. --- ## Not for commercial use. No derivatives. See © link. --- **Also see my [Scales Texture Bundled Set](https://cults3d.com/en/3d-model/home/scales-texture-bundled-set).** Inspired by this original Cup of Cubes! Items available as separate downloads too. See links on post for bundled set. [:format(webp)/https://fbi.cults3d.com/uploaders/14440147/illustration-file/666c54dc-be6a-4ed1-a7ca-29e8c4894ad0/20241221_075813.jpg)](https://cults3d.com/en/3d-model/home/scales-texture-bundled-set) ---
- abbymath
- vase
- cup
- vase mode
- spiral mode
- decor
- cubes
- cylinder